Featured Sometimes It's The Little Things

Discussion in 'Bonneville' started by TonyG, Jul 24, 2024.

  1. TonyG

    TonyG Noble Member

    Dec 1, 2016
    818
    443
    Bucks
    I adjusted my gear lever by 1 spline downwards as I've always felt I had to raise my foot a bit to change gear, swapped out the very thin grips for some thicker textured ones, went 1 up on the pre-load on the Hagons and installed an EBC floating disc with titanium bolts and new EBC pads. Other than the disc these were really small changes.
    Went for a ride and it all seemed tighter and better, though I'm always wary of the placebo effect when you make changes.
    Each year I promise no more mods!

    IMG_20240724_142132129.jpg

    IMG_20240724_142142060.jpg

    IMG_20240724_142202692.jpg
     
    • Like Like x 8
    • Agree Agree x 2
  2. learningtofly

    learningtofly He’s not the Messiah, he’s a very naughty boy!
    Subscriber

    Sep 25, 2018
    2,084
    1,000
    Hertfordshire
    Looks fantastic (speaking as someone with dozens of mods on his bike)!
     
    • Agree Agree x 2
  3. Eldon

    Eldon Elite Member

    Nov 14, 2018
    6,188
    800
    North Yorkshire
    #3 Eldon, Jul 24, 2024
    Last edited: Jul 24, 2024
    Small changes yes, but thats in measurement not value!

    Having ridden a lot off road previously, and watched various people struggle, you are spot on the money. Having the controls just there!!! makes the whole experience so much nicer and when control becomes very important, especially on timing i.e. obstacles, the person is so much more able.
    Comfort comes into it in a big way on-road as you're not now over stretching, tap dancing your feet about etc.

    Enjoy :blush:
    Personalising a bit always improves the experience.

    A few years ago I made a one off clutch lever for my 8 year olds son's hand using old broken parts and a bit of tig welding. The span and power were obviously small at his age, but his riding improved instantly!
     
    • Agree Agree x 2
  4. TonyG

    TonyG Noble Member

    Dec 1, 2016
    818
    443
    Bucks
    Cheers, I think the thing I noticed most was the gear lever! I'd got used to it where it was but that tiny change made a big difference.
     
    • Agree Agree x 4
  5. Eldon

    Eldon Elite Member

    Nov 14, 2018
    6,188
    800
    North Yorkshire
    #5 Eldon, Jul 24, 2024
    Last edited: Jul 24, 2024
    On my StreetTwin I found the gearlever a touch too low, but a spline would be too much :rolleyes:
    I just wanted it a touch higher as it niggled me each time out on it.

    I created a new end with about a 6mm gain on radius and never looked back since.
     
    • Agree Agree x 1
  6. Samz

    Samz Elite Member
    Subscriber

    Aug 7, 2016
    128
    743
    York uk
    I created a new end with about a 6mm gain on radius and never looked back since.[/QUOTE]

    Perhaps some new mirrors next? ;)
     
    • Agree Agree x 1
  7. Eldon

    Eldon Elite Member

    Nov 14, 2018
    6,188
    800
    North Yorkshire
    Perhaps some new mirrors next? ;)[/QUOTE]


    Mirrors already done and now bar ends instead of mickey mouse ;)

    Or did you respond to the wrong post and that was intended for someone else ?
     
    • Useful Useful x 1
  8. BUDDY_L

    BUDDY_L New Member

    Jul 24, 2024
    0
    0
    FLORIDA
    BIKE LOOKS GREAT!!
    Even after adjusting upward I've always hated how short the shift lever is! It's a Bit*h with big feet! Anybody ever see a longer lever arm or know of one from a different bike that will fit???
     
    • Agree Agree x 1
  9. TonyG

    TonyG Noble Member

    Dec 1, 2016
    818
    443
    Bucks
    Thanks...
    I'm sure other gear pegs would fit, no idea which ones though.
    I'm lucky in that at just under 5ft 8 inches I seem to be exactly the right size for nearly all bikes except giant adventure type things!
     
    • Agree Agree x 1
  10. TonyG

    TonyG Noble Member

    Dec 1, 2016
    818
    443
    Bucks
    • Useful Useful x 1
    • Agree Agree x 1
  11. beerkat

    beerkat Senior Member

    Aug 14, 2019
    862
    243
    Cheshire UK
    TonyG I'm interested as to why you fitted the EBC floating disc. Was the previous (original?) disc a floater or fixed? Have you found any noticeable difference?
     
    • Agree Agree x 2
  12. TonyG

    TonyG Noble Member

    Dec 1, 2016
    818
    443
    Bucks
    The previous rotor was the, in my view, pretty horrible, fixed, ugly, heavy Sunstar disc. The bike has about 15k miles on it, pads were due to be replaced so just treated it to a floating EBC. I'd changed the dual discs on my old Thruxton 1200 to Brembo floating discs and it felt like it improved the braking so thought I'd just treat it to an upgrade, plus I had some cash from selling off various bits from the Thruxton. Now the pads are worn in it does feel a bit better and is far better looking and lighter, so I'm happy with it. I also just like tinkering within my abilities.
     
    • Like Like x 1
    • Thanks Thanks x 1
    • Agree Agree x 1
  13. TRIPLE X

    TRIPLE X Senior Member

    Sep 1, 2021
    349
    113
    Downham Market, Norfolk
    Floating discs are less prone to warping so are the better option. They also look better than fixed discs in my opinion so I agree it's a worthy upgrade.
     
    • Agree Agree x 1
  14. RevPaul

    RevPaul Senior Member

    Apr 21, 2020
    709
    193
    Cheshire, UK
    Reported as spam
     
    • Useful Useful x 1
  15. TonyG

    TonyG Noble Member

    Dec 1, 2016
    818
    443
    Bucks
    Spam ?
     
    • Agree Agree x 1
  16. RevPaul

    RevPaul Senior Member

    Apr 21, 2020
    709
    193
    Cheshire, UK
    There was a post between mine and @TRIPLE X's by a "new member" that simply gave a link to a rather questionable website. Rather than include the link in my post I deleted the quote by the "new member" in my post.

    Now that the offending post has been removed, it looks like I've reported this helpful thread as spam.
     
    • Like Like x 1
  17. TonyG

    TonyG Noble Member

    Dec 1, 2016
    818
    443
    Bucks
    Oh, no problem, cheers!
     
    • Like Like x 1
Loading...

Share This Page