Sold - Nitron Ntr3 (stealth) Shocks - To Fit 1200 Speed Twin - Sold

£500 collect from Bristol. Cheaper than a pair of NTR1’s

 

These purpose built NTR3’s were removed from my 1200 Speed Twin prior to sale.
Unlike the earlier NTR1 shocks these have no interference issues.

Matched pair. The photo shows them outside of the left hand shock and the inside of the right hand one. The right hand one has not lost a sticker!

 

Still here…these cost £1300 new

 

.

 

Sorry unwilling to post although for someone a bit closer I might deliver.

To answer your questions…
The possibility of different spigot length and diameter aside which means they couldn’t be bolted onto the T120, they’re also 2” longer than the T120 shocks.
These were built to order by Nitron for my 1200 Speed Twin, meaning they’re not take-offs from a totally different bike that happen to fit the Speed Twin,

 

Yes, still have them. These were built Sep ‘20 and from memory have had less than 4000 miles use.
They’ve 16-24N/mm springs fitted which will cope with a wide weight range. Aftermarket Ohlins would usually come with 16-26 springs. Nitron would be table to tell you if these springs are suitable for your weight. These have both high and low speed compression damping which the cheaper

 

Edited

 

Yes these are still available but collection only, I’ve been burnt once too often by things getting damaged/going missing.

However I may be going up to Cambridge later in the summer.
If I do and you’re willing to collect from there I’ll let you know when and hold off advertising elsewhere

 

Hi, they’re length adjustable and have been extended from the original length of 385mm out to 390mm. I think they’ll extend a further 5mm to 395 or go back to 385 if required.

 

Sold