Tiger 1200xrt Fault Codes

Discussion in 'Technical Help' started by PeteH, Feb 8, 2020.

  1. PeteH

    PeteH Active Member

    Oct 1, 2013
    57
    28
    Chester
    C1088: CAN FAULT - lost comms with ABS module or ABS system
    C1108: TSAS - ABS implausible signal
    Both faults constantly return after being cleared, dealer has contacted Triumph and they apparently haven't seen this before.
    Faults found through updates etc during 2 yr service and no warnings on dash. Bike was 26 days out of warranty but still hoping Triumph will look into it.
    Your thoughts are appreciated.
     
    • Agree Agree x 1
  2. dilligaf

    dilligaf Guest

    Can’t help I’m afraid :confused:
    But let us know how you get on :)
     
    • Agree Agree x 1
  3. crispey

    crispey crispey creme de la creme

    Nov 6, 2014
    7,230
    1,000
    Uk
    Have you bled the brakes or changed anything on the brake system?
     
    • Agree Agree x 1
  4. PeteH

    PeteH Active Member

    Oct 1, 2013
    57
    28
    Chester
    The bike had a service at my local dealer, clutch and brake fluid renewed.
    They contacted me today to say that they'd been on to Triumph and they say it's due to low voltage when the engine cranks which is kidding the ABS system.
    Checked the battery today and the static voltage was 12.55v, running voltage is 14.47v1 then checked static voltage 40 mins later and it was 12.63v. Service department thought the static voltage should be 12.7v so need to confirm. Battery was new in August as the original failed after 20 months?
     
  5. Big j 7700

    Big j 7700 New Member

    Nov 9, 2023
    4
    3
    Belgique

    Hello,

    I have the same problem with my 2017 xrt motorcycle...

    Did you find the problem? and a solution? please.

    thanks thanks.

    Have a good evening
     
  6. FreddyG

    FreddyG New Member

    Nov 14, 2017
    24
    3
    Miami, Fl
    Hi, my 2023 Tiger 900 RP had 2434 kilometers when I started a 4 days trip around (1800Kms) the Check Engine and warning light came on at about 10-15 Kms. never came off, did the 1800 kms in about any terrain imaginable and the Tiger never fail. Error codes are P0915/C1062/C1087/C1088/C1091 . P0915 don't know what is. C1062 heated seat undercurrent which I don't have because my Tiger is an Aragon. C1087/1088/1091 CAN lost communication. Does any body knows how to turn this off and why they came on if the bike runs perfect??
     
Loading...

Share This Page