Thruxton Low Comfort Seat

Discussion in 'Thruxton, Scrambler & Trident' started by TonyG, Dec 19, 2018.

  1. TonyG

    TonyG Noble Member

    Dec 1, 2016
    820
    443
    Bucks
    #1 TonyG, Dec 19, 2018
    Hi,

    The one extra item I purchased for my new Thruxton was a low comfort seat. I ordered it off the internet and it arrived today. It looks lovely, have no idea if it is actually more comfortable yet, and seems fractionally lower. My only gripe is that it leaves about a 1/4 inch gap between the tip of the seat and the rear of the tank. The curve of the seat to the tank looks perfect, just this gap. The original seat butts up against the tank. Is this gap normal? If I didn't directly compare to the standard seat I probably wouldn't notice.

    Cheers
     
  2. Glyn Phillips

    Glyn Phillips Old’N’Slow

    Jun 21, 2018
    967
    750
    Essex
    #2 Glyn Phillips, Dec 19, 2018
    514E2D6B-C66F-457A-A68D-4AE62E46DD1F.jpeg Is it the same as mine?
     
  3. TonyG

    TonyG Noble Member

    Dec 1, 2016
    820
    443
    Bucks
    #3 TonyG, Dec 19, 2018
    Hard to tell, looks similar, could push my fingertip into the gap. Just that the stock seat butted up right against the tank. Water would clearly run down the gap. I'm probably being a little precious about about it really!
     
  4. Glyn Phillips

    Glyn Phillips Old’N’Slow

    Jun 21, 2018
    967
    750
    Essex
    #4 Glyn Phillips, Dec 19, 2018
    Last edited: Dec 19, 2018
    Mine seems to have a gap too, I just thought it was because the tank strap takes a little space, so couldn’t tell what the gap was caused by. Or if it was there beforehand
     
  5. capt

    capt Elite Member

    May 8, 2016
    3,051
    750
    western Australia
    #5 capt, Dec 20, 2018
    Stop wingeing the gap will prevent the tank from being rubbed, the paint won't get worn/damaged ! It takes time but it will happen, my 09 America has paint worn right through by the std seat rubbing it away !!!
     
  6. TonyG

    TonyG Noble Member

    Dec 1, 2016
    820
    443
    Bucks
    #6 TonyG, Dec 20, 2018
    Am I being too sensitive?

    Probably......

    SAM_0752.JPG

    SAM_0753.JPG
     
  7. Glyn Phillips

    Glyn Phillips Old’N’Slow

    Jun 21, 2018
    967
    750
    Essex
    #7 Glyn Phillips, Dec 20, 2018
    Mines pretty much the same so I wouldn’t worry too much

    8EFF67DD-1810-4488-AA92-1AF0BC206F7A.jpeg
     
  8. TonyG

    TonyG Noble Member

    Dec 1, 2016
    820
    443
    Bucks
    #8 TonyG, Dec 20, 2018
    Thanks Glyn,

    Have you got your one back together yet?

    I've done my back in and can't even lift mine off the side stand, at least the weather is crap, I'd not be too happy if it was dry.
     
  9. Glyn Phillips

    Glyn Phillips Old’N’Slow

    Jun 21, 2018
    967
    750
    Essex
    #9 Glyn Phillips, Dec 20, 2018
    No not yet,
    I finish work tomorrow for two weeks and I’ll refit the suspension and fit the nose fairing over the break
     
    • Like Like x 1
  10. Glyn Phillips

    Glyn Phillips Old’N’Slow

    Jun 21, 2018
    967
    750
    Essex
    #10 Glyn Phillips, Dec 20, 2018
    Mate that sounds more like you’re whinging about your paint to me!
     
  11. capt

    capt Elite Member

    May 8, 2016
    3,051
    750
    western Australia
    #11 capt, Dec 20, 2018
    Not winging at all, pointing out what will happen ! It happened to my Triumph Bonneville America and to a lesser degree to a 2000 Sprint, before I spotted the problems and taped the area up , but on the America the tape wore through as well ! I don't winge about wear and tear on my bikes. But when I see you guys on here getting pedantic about appearance on your pride and joy. Which some of the forum members really go over the top ! I will mention some of the pit falls that aren't obvious, wings about a gap and there is a reason for it, paint rubbing away would be one ? When seat's are now made with thick plastics and nylon bases they flex , especially with the weight of the rider moving about "as you ride" the flex causes wear !!
     
  12. TonyG

    TonyG Noble Member

    Dec 1, 2016
    820
    443
    Bucks
    #12 TonyG, Dec 21, 2018
    Well, I'll comment any way I like on what is to me a massive investment. As it happens it wasn't a whinge, it was a question. I didn't complain just asked if it was normal as the seat it came with butted right up against tank. I got some very helpful replies, including yours minus the whinge comment, and I'm quite happy.
     
    • Like Like x 1
  13. P.T.

    P.T. New Member

    May 4, 2021
    20
    3
    Norway
    #13 P.T., Apr 29, 2024
    Do you remember part no.?
     
  14. timboo

    timboo Senior Member

    Oct 17, 2021
    306
    113
    Cambridgeshire
    #14 timboo, Apr 29, 2024
    I noticed that the pictures show a none standard strap could the strap be the cause of the gap opposed to the seat?
     
  15. TonyG

    TonyG Noble Member

    Dec 1, 2016
    820
    443
    Bucks
    #15 TonyG, Apr 30, 2024
    It has the following number on the invoice, TRA2304639, hope that helps.
     
  16. TonyG

    TonyG Noble Member

    Dec 1, 2016
    820
    443
    Bucks
    #16 TonyG, Apr 30, 2024
    Do you meant the tank strap? That is the standard Triumph part as far as I m aware. Anyway, it's probably got a bigger gap now as the bike was a cat N write off last month.
     
  17. timboo

    timboo Senior Member

    Oct 17, 2021
    306
    113
    Cambridgeshire
    #17 timboo, Apr 30, 2024
    The standard strap doesn’t have holes in the metal strap.
    The part on your bike is probably A9798010.
    It replaces both the metal strap and backing strap. The only part I cannot tell u is if there is any difference between the original and the replacement, just a consideration
     
  18. TonyG

    TonyG Noble Member

    Dec 1, 2016
    820
    443
    Bucks
    #18 TonyG, Apr 30, 2024
    Ah, ok, understand. I think I sent the 1st seat back anyway because it had a dent in the seat hump and I think the replacement was a better fit.
     
  19. timboo

    timboo Senior Member

    Oct 17, 2021
    306
    113
    Cambridgeshire
    #19 timboo, Apr 30, 2024
    Looking further at the images the backing strap on yours is actually leather the standard one is not made from leather.
    Here is a pic of mine. I will see if i have any further with the seat meeting tank.

    IMG_7754.png

    IMG_7753.png
     
Loading...
Similar Threads - Low Comfort Seat
  1. Paul Coupe

    Tiger Explorer Low Comfort Seat - Explorer

    Paul Coupe, Jul 24, 2018, in forum: Tiger / Explorer
    Replies:
    0
    Views:
    891
    Paul Coupe
    Jul 24, 2018
  2. Pocket Rocket

    Thruxton Comfort Low Seat

    Pocket Rocket, Apr 18, 2018, in forum: Wanted
    Replies:
    0
    Views:
    1,659
    Pocket Rocket
    Apr 18, 2018
  3. Dan Zulu

    Considering Buying Older Low Mileage Bike.

    Dan Zulu, Nov 19, 2024, in forum: Triumph General Discussion
    Replies:
    8
    Views:
    604
    Sandi T
    Nov 27, 2024 at 8:26 PM
  4. Lloyd Hulands

    Street Triple 660 2017 Blowing Smoke

    Lloyd Hulands, Oct 4, 2024, in forum: Technical Help
    Replies:
    1
    Views:
    206
    joe mc donald
    Oct 19, 2024
  5. Trickle333

    K&n Air Filter Vs Oem Or Hi Flow Etc.

    Trickle333, Oct 2, 2024, in forum: Technical Help
    Replies:
    14
    Views:
    781
    Trickle333
    Oct 7, 2024

Share This Page

Sign up