Backfiring....but It Lives!

Discussion in 'Bonneville' started by La_leo, Apr 11, 2024.

  1. La_leo

    La_leo Well-Known Member

    Mar 25, 2023
    38
    68
    USA
    #1 La_leo, Apr 11, 2024
    Last edited: Apr 11, 2024
    Well, my 01 Bonneville lives again. I cleaned the carbs, cleaned the slides, put new gaskets, new float needles. I hooked up a temporary fuel line. Cranked right up. Let it idle a bit, gave it a little throttle and seemed responsive. But, it backfires horribly every time you give it throttle and at idle. Things I know about the bike that the previous owner did: it had the TORS installed at the dealership and was re-jetted. It had the emissions system bypassed and blocked off. Re-installed the airbox with a new air filter and new rubber inlets. I unplugged the TPS just to see, only to have the same result. I have included a link to the video of my bike running. I also included photos of my plugs. Keep in mind these plugs are brand new. On the upside, it fires right up and seems to idle well. I did not take note of which exhaust pipe the backfiring was coming out of, or if it was both. I'll do that tomorrow. I'm going to turn the idle mix screws out a bit to richen it and see if that helps. Here's the link in case the embedded video doesn't work:



    [​IMG][​IMG][​IMG][​IMG]
     
    • Like Like x 2
  2. RickM46

    RickM46 Active Member

    Oct 12, 2023
    57
    28
    US
    • Agree Agree x 1
  3. La_leo

    La_leo Well-Known Member

    Mar 25, 2023
    38
    68
    USA
    • Agree Agree x 1
  4. La_leo

    La_leo Well-Known Member

    Mar 25, 2023
    38
    68
    USA
    • Agree Agree x 1
  5. RickM46

    RickM46 Active Member

    Oct 12, 2023
    57
    28
    US
    Wonder if timing is also a factor???
     
    • Agree Agree x 1
  6. La_leo

    La_leo Well-Known Member

    Mar 25, 2023
    38
    68
    USA
    I will take the valve cover of and see if the timing marks align if re cleaning the carbs doesn't fix it
     
    • Agree Agree x 1
  7. 243jimb

    243jimb Member

    Nov 27, 2018
    6
    8
    Canada
    You might want to try turning the idle screws in to lean the mixture a little as it would appear that there is too much fuel on overrun which is igniting in the exhaust.
     
    • Agree Agree x 1
  8. La_leo

    La_leo Well-Known Member

    Mar 25, 2023
    38
    68
    USA
    Yep, tried that.. went all the in and then all the way out, it helped but it's definitely not right. I checked the air valve diaphragm also, it seemed fine.
     
    • Agree Agree x 1
  9. Traveler

    Traveler Well-Known Member

    Jun 21, 2023
    149
    93
    Helena, Sweet Home Alabama
    Air leak somewhere.
     
    • Agree Agree x 1
  10. La_leo

    La_leo Well-Known Member

    Mar 25, 2023
    38
    68
    USA
    Fixed it!!! Took off the carbs again and removed the jets. Found a tiny passage was blocked and I had to run a wire in it. It runs awesome now!!

    20240415_200433.jpg
     
    • Like Like x 3
    • Useful Useful x 1
  11. La_leo

    La_leo Well-Known Member

    Mar 25, 2023
    38
    68
    USA
    Runs great! Got it put back together today.

    20240416_183922.jpg

    20240416_183922.jpg
     
    • Like Like x 4
  12. La_leo

    La_leo Well-Known Member

    Mar 25, 2023
    38
    68
    USA
    • Agree Agree x 1
  13. 243jimb

    243jimb Member

    Nov 27, 2018
    6
    8
    Canada
    It does sound a little noisy, when was the last time you did the tappets?
     
    • Agree Agree x 1
  14. La_leo

    La_leo Well-Known Member

    Mar 25, 2023
    38
    68
    USA
    6k miles from the dealership. It's now at 12k. The dealership said I can wait until about 30 or 40k.
    But I will at least check clearances
     
    • Agree Agree x 1
  15. RickM46

    RickM46 Active Member

    Oct 12, 2023
    57
    28
    US
    Oil level, weight, pressure?
     
    • Agree Agree x 1
  16. La_leo

    La_leo Well-Known Member

    Mar 25, 2023
    38
    68
    USA
    But I will at least check cleare
    Oil level great, 40 weight valvoline full synthetic motorcycle oil, triumph filter
     
    • Agree Agree x 1
  17. RickM46

    RickM46 Active Member

    Oct 12, 2023
    57
    28
    US
    Straight 40 weight??
     
    • Agree Agree x 1
  18. La_leo

    La_leo Well-Known Member

    Mar 25, 2023
    38
    68
    USA
    10w40

    Screenshot_20240418_092300_Amazon Shopping.jpg
     
    • Like Like x 1
  19. joe mc donald

    Subscriber

    Dec 26, 2014
    14,443
    1,000
    slough / burnham
    @La_leo
    What pipes have you got on the bike. Oem or Triumph of road versions. But it is fairy near what it should be. Just ride it for a while and have some fun. Joe
     
    • Like Like x 1
  20. La_leo

    La_leo Well-Known Member

    Mar 25, 2023
    38
    68
    USA
    Factory tors. It was re jetted by the dealership and the air emissions thing was removed. Valves were adjusted at 6000 miles.

    20240418_231942.jpg
     
    • Like Like x 1
Loading...

Share This Page