Street Triple 765rs Exhaust Options

I believe lots of people are either buying full systems or buying headers from the previous generation of Street Triples and the slip on of their choice as that can work out more cost effective than a full aftermarket system.

 

2018 model headers with a Scorpion can sounds like a suitable solution but check first.

 

Here you go @Cuban here's my 2018 765rs with Scorpion can and link pipe to see if you like the look?

 

I've got the Arrow on mine, its a bit lighter than the stock pipe and IMO its better looking, but if its noise you are after then don't bother as its more or less the same as the stock set up in the db department

 

Racefit - I liked it. I had the Growler and Mega on R1 & GSXR 1000 K6. I don't think I will buy another Racefit because they are way too loud even with the baffles in. I mean seriously loud.

As Eldon mentioned - Scorpion has a decent note to it but you might need to get the fuelling sorted via ECU custom map, PC or by other means. I might be wrong about the fuelling but do check it out.

 

Remap is certainly a possibility, especially as mine and the OP are different generations, but all I did was the start and run, without throttle, reset.
Mine starts and runs fine, no issues and I prefer it with the baffle in as it can drone on constant throttle.

 

I just did the start and run reset with my 2021 too. I did have the baffle out for a while but it was a bit obnoxious, so it's back in!!

 

No its a slip on, but includes the collector box underneath. Its very easy to fit, but as I said don't expect any major noise level increases.