Tiger 800 2024 Ecu Map On 2023 Model Tiger 900

Good question Joel. Unfortunately I don't know the answer. I hope someone does and replies. A few extra horsepower would be welcome.

 

like your thinking, if they have the same ecu it sounds like it should be possible. i believe the limits on the 23 model is in the etv tables. i have a map ready to load but like you do not want to invalidate my warranty.

 

I loaded the map to my bike last week. well worth doing the bike pulls like hell now when it hit 7K revs. i added fuel to the areas that i increased the ETV openings to ensure it wouldnt be running lean

 

Good to know feckless. Unfortunately way beyond my skill level,

 

Hi Feckless...would you possibly be kind enough to share the details of how to do the whole process? I own a 2022 900 Rally Pro. I do have Tune ECU...used it to remap my Bonneville T120 a couple of years ago. Any help on sourcing the 2024 map for the 900 Rally Pro & the settings for the etv tables for fuelling to prevent the bike running lean would be much appreciated. Thanks in anticipation...

 

load the map for your bike in tunecu and go to etv tables you will see above 7 or 8k revs in the tables that the values are not 100 so change these to 100 and save them. then just load the tune into the bike. if you have a play around with it 1st you will soon get the hang of it
Have a look at these youtube vids and it will become clearer for you. hope that helps

 

Thank

Thanks a ton Feckless, that helps much, since have some prior experience of using Tune ECU for a custom map on my Bonneville T120...will try this out soon & give a shout out to you! Once again, many thanks for the reply & sharing the info/knowledge...