Help I’ve Lost The End Of Syphon In Fuel Tank

As the title suggests I’ve royally screwed up. I decided to remove some of the fuel in prep for winter and the end of my syphon has come off inside my tank. Is there an easy way if getting to it?
Annoyingly it worked a trick last year unfortunately got snagged this time.

Is it case of fuel tank off?

Its a thruxton R

 

Copper I think :-(

I’m hazarding a guess i need to remove the tank and the fuel pump to gain better access. I dont own an endoscope and nice pair of small pincers to grab the damn thing unfortunately.

 

Could work if i knew where the damn end was in the tank. I also worried in case i have already caught the fuel pump and damaged it too during the part where the end got stuck.
On this occasion I’m such a helmet

 

I will give triumph parts a bell tomoz to see if i need to replace the gasket if i remove the fuel pump.

 

Yep tank off I reckon I have searched the forum for tank removal and the worst part seems to be the fuel line clip at the tank from what I can see.

 

cheers didnt know that re full tank. I realised that I used 2 hoses last year one to blow the other for the fuel to leave. I now remember removing the end for that very reason

 

Lesson learnt managed to fish the culprit out following removal of the fuel pump, for once a gasket could be re used. Double checked with Triumph as thought it looked more substantial than others.
Good to learn more about my bike.

 

I’m glad i didn’t use one of those having removed the fuel pump and found that there are delicate wires inside the fuel tank.

 

Amazing pieces of kit these motorcycles are

 

Cheers I ended up removing the tank and fuel pump then fishing it out in the end. Wont be doing that in a hurry again.
Images posted several months back thanks anyway.

 

I didnt find one for my particular bike but i did watch this one from memory as a starting point.

https://www.triumphrat.net/threads/t120-tank-removal.797849/

The most difficult part is detaching the fuel line as the clip was really tough. I’ve seen u can buy a tool not sure how effective it is.

There are a few things which i did not see mentioned which I learnt as going along.

In terms of steps I did the following

1. Bike on paddock stand
2. Remove seat
3. Disconnect and remove battery
4. place several towels onto the back end of the bike so can slide the tank backwards.
5. undo and remove single bolt fixing tank nearest the battery.
6. slide tank slightly off its fixing at front cant remember if it was backwards or forwards but its only slightly then slide tank back around 4-5 inches onto towels whilst lifting and placing a piece of 3x2 under the front end to raise the tank for access beneath.
7. Stop breathe for a moment and have a good look around to get an understanding of what needs disconnecting.
8. Disconnect power cable
9. disconnect the overflow pipe
10. Locate fuel line connector on offside of bike not at entry to tank.
Pull clip back. Press both sides of plug beneath which have been revealed. I think i used 2 alan keys to oress on both sides. Remove plug (this part was fiddly and took many attempts as you need to be gentle)
11. Place work bench next to bike. Lay further towels on work bench
12. Place tank onto work bench
13. I needed access to the bottom of the tank so turned tank over.
14. Unscrewed fuel pump and lifted it partially out.
15. Re attached fuel pump but make sure breather outlet has a hise on it or is covered. When re attaching fuel pump it causes fuel to leak out of the breather as the tank is upside down.
Once fuel pump re attached turn tank over fuel stops coming out.

Think thats about all I did.

Towels and soft wood or some other soft material to support the tank are really important to prevent damage to the underside of the tank.

Note I called triumph who gave me the correct torque for the fuel pump fixings. Think it was 5nm but i’ve slept since. The gasket can be re used.

I’m sure other people may have a different approach but this way worked for me.
Some of my terminology may also be out re breather hose and overflow as I’m not a mechanic in fact far from it.