Help Needed With My Carbs Please

ZZR 600 had a set of shims available to go under the needle retaining clip to give a similar effect.
The shims were a given thickness so as to enrichen the fuel flow and negate the effects of aftermarket pipes weakening the mixture and avoiding creating a stumble on acceleration.

 

Amost certainly pilot jets. You need to poke them through with copper wire. Air, ultrasonic cleaned just dont work.

 

The Mikuni BST36's have several grooves at the top of the needle to make the adjustment. It is the last tuning point on these carbs, The pilots are to set the idle mixture. The main jets are to set the upper range. Setting the needle height tunes out the flat spot in between. If you change either the mains or the pilots, this may need attention. I like Mikuni's because, they made provision for this by providing an adjustment there. ...J.D.

 

But is the correct fuel tap a vacuum operated one i.e. not constant gravity fed?

By the sound of it your fuel supply is now constant which the system may not be able to accept.

 

Great news gents. She is purring like a Tiger again. All is normal. Thank you all for taking the time to add your thoughts.

Big mention to T552 who was spot on. Pilot jets blocked. Drain those float bowls gentlemen.


Everyday a sckool day….

 

Good to hear the bike is running fine but could you do me a favour and tell me why you ignored my advice about the pilot jets in post number 12 of this thread? I'm interested to know how to word any advice in the future?

 

Hi Whattie

Absolutely nothing wrong with your advice or the way you present it. What you failed to allow for is muppets like me that didn’t know that I had pilot jets. I typed my post no. 13 before looking at your suggested Kev’s shed vid. At 15min55ses I discovered that I have pilot jets.
Its clear that I was mistaking my emulsion tubes for pilot jet.

I got there in the end 'spose

Many thanks again for taking the time to add to the thread.

 

I’ve been sat on the sofa tonight in me pants watching youtube. Learnt a lot from this vid






Especially 5min 57secs

 

Ah, thanks for explaining. Glad you got there in the end and fixed it yourself, it's very rewarding. Also nice to hear another trophy 12 owner keeping it on the road.