Featured Tiger 90 Rebuild

Discussion in 'Vintage Classics' started by Sir Clip, Feb 6, 2022.

Page 20 of 20
  1. Markus

    Markus Crème de la Crème
    Subscriber

    Oct 28, 2020
    3,500
    1,000
    AUSTRIA
    #381 Markus, Oct 27, 2022
    The bike is looking great! You did a really good. Job. Enjoy it now!!!
     
    • Like Like x 2
  2. sprintdave

    sprintdave Nurse,he's out of bed again

    May 25, 2014
    1,532
    750
    Birmingham
    #382 sprintdave, Oct 27, 2022
    Are you getting the evil eye then?
    Great job, it looks gorgeous.
     
    • Like Like x 1
    • Funny Funny x 1
  3. The Hon. Clip

    The Hon. Clip New Member

    Jun 20, 2022
    6
    3
    California
    #383 The Hon. Clip, Oct 27, 2022
    A fantastic completion and the recovery of a very worthwhile bike. Well done on accomplishing this so well.
     
    • Agree Agree x 2
    • Like Like x 1
  4. Sir Clip

    Sir Clip Senior Member

    Jan 8, 2022
    853
    143
    Exeter
    #384 Sir Clip, Oct 27, 2022
    First fettle - change the petrol tap, as the original Ewerts tap leaked, despite having boiled the cork seals. I don’t have spare corks here, so it was easier to put a new tap in.
    7D935F00-4565-48A5-A019-99221A2147E0.jpeg
     
    • Like Like x 5
  5. Sir Clip

    Sir Clip Senior Member

    Jan 8, 2022
    853
    143
    Exeter
    #385 Sir Clip, Oct 27, 2022
    Here you go:
     
    • Like Like x 6
    • Funny Funny x 1
  6. Chris Little

    Chris Little What weather?

    Jan 11, 2022
    15
    3
    UK
    #386 Chris Little, Oct 28, 2022
    Give yourself a pat on the back!
     
    • Like Like x 2
  7. Sir Clip

    Sir Clip Senior Member

    Jan 8, 2022
    853
    143
    Exeter
    #387 Sir Clip, Oct 28, 2022
    That song is in my grandad’s 78s record collection. :)
     
    • Like Like x 1
  8. Sir Clip

    Sir Clip Senior Member

    Jan 8, 2022
    853
    143
    Exeter
    #388 Sir Clip, Oct 29, 2022
    New tool tray bolted on.
    New handlebar grips.
    The repaired hi-lo beam switch failed, now waiting for a replacement.
     
    • Like Like x 5
  9. DaveQ

    DaveQ Well-Known Member

    Jul 28, 2022
    194
    93
    Surrey. England
    #389 DaveQ, Oct 31, 2022
    Well done on finishing. It looks and sounds great.

    May I ask, after you’d cleaned out the petrol tank did you use any sealer inside?
    Dave.
     
    • Like Like x 2
  10. Sir Clip

    Sir Clip Senior Member

    Jan 8, 2022
    853
    143
    Exeter
    #390 Sir Clip, Oct 31, 2022
    No sealer was used.
     
    • Like Like x 1
    • Useful Useful x 1
  11. Sir Clip

    Sir Clip Senior Member

    Jan 8, 2022
    853
    143
    Exeter
    #391 Sir Clip, Nov 4, 2022
    New handlebar switch wired in and tested. Just need some dry weather to go for a spin.
    1CBEDC06-1AF1-4D60-8C5B-76143D120273.jpeg
     
    • Like Like x 5
  12. Sir Clip

    Sir Clip Senior Member

    Jan 8, 2022
    853
    143
    Exeter
    #392 Sir Clip, Nov 4, 2022
    New handlebar switch wired in and tested. Just need some dry weather to go for a spin.
    View attachment 153629
     
  13. Sir Clip

    Sir Clip Senior Member

    Jan 8, 2022
    853
    143
    Exeter
    #393 Sir Clip, Feb 19, 2023
    Refurbished the carb with an Amal kit, now running much better and the annoying leak from the carb gasket has stopped.
    EF55F30B-E6CC-414A-97E1-21AD6855B2B5.jpeg
     
    • Like Like x 4
  14. Sir Clip

    Sir Clip Senior Member

    Jan 8, 2022
    853
    143
    Exeter
    #394 Sir Clip, Feb 19, 2023
    Went for a spin today and the crash bar fell off!
    Also need to reposition the front mudguard, strengthen the side stand arm, and tighten the right hand exhaust down pipe. Apart from that, all is going well.
    71FD382F-C1B7-4F2D-B9C3-D9D322ABCDA5.jpeg
     
    • Like Like x 4
  15. The Hon. Clip

    The Hon. Clip New Member

    Jun 20, 2022
    6
    3
    California
    #395 The Hon. Clip, Feb 19, 2023
    Last edited: Feb 19, 2023
    British bikes of that era are never really complete. Every week, there is a new trivial adjustment or minor repair or small defect to address. At least, that's my experience.

    I'm riding around on a 4 year old electric Zero motorcycle, and I'm amazed at how I miss the need to constantly fettle this bike. I'm coming up to my two year anniversary on this bike, and literally the only maintenance it has needed is some air in the tyres. No wiring or fuses, no carb leaks, no exhaust rattles, no blown light bulb, no oil leak from the clutch cover, nothing. It's like that part of the film where the hero says "It's quiet ... too damn quiet." This is also one of the fastest motor bikes I have owned - not faster than my BMW R1150R though.
     
    • Funny Funny x 2
    • WTF WTF x 1
  16. Sir Clip

    Sir Clip Senior Member

    Jan 8, 2022
    853
    143
    Exeter
    #396 Sir Clip, Feb 19, 2023
    It’s a good thing i enjoy fiddling with motorbikes!
     
    • Like Like x 1
    • Agree Agree x 1
  17. Baza

    Baza Elite Member

    Jul 25, 2020
    3,216
    750
    Amazing Grace
    #397 Baza, Feb 20, 2023
    That right hand exhaust pipe is probably the most vulnerable part of your motorcycle.

    EBE869D2-97B6-4F77-8103-81BA34550A89.jpeg
     
    • Funny Funny x 5
  18. Sir Clip

    Sir Clip Senior Member

    Jan 8, 2022
    853
    143
    Exeter
    #398 Sir Clip, Feb 23, 2023
    Repair on the crash bar.
    1EE4FC31-C431-48A0-8F7E-D3E074529F6C.jpeg
     
    • Like Like x 2
  19. Sir Clip

    Sir Clip Senior Member

    Jan 8, 2022
    853
    143
    Exeter
    #399 Sir Clip, Mar 6, 2023
    The carb was a problem - it’s non-standard and has a huge flat spot half way through the rev range, probably because the Goldie style pipes have been swapped for a standard exhaust. The easiest fix (but not the cheapest) was to get a new, correct carb from Burlen. What a difference! It’s much more easy to rev, and accelerates well.
    41A8DD7C-87CD-4A7D-88D2-378BCCF641B6.jpeg
     
    • Like Like x 4
Page 20 of 20
Loading...
Similar Threads - Tiger Rebuild
  1. Lee1962

    '55 Tiger 100 Engine Rebuild

    Lee1962, Mar 4, 2019, in forum: Builds & Projects
    Replies:
    3
    Views:
    956
    Lee1962
    Apr 24, 2019
  2. Notso

    Tiger Sport 800

    Notso, Oct 28, 2024 at 9:57 AM, in forum: Triumph General Discussion
    Replies:
    3
    Views:
    440
    Blacktruck
    Oct 31, 2024 at 4:28 PM
  3. Gern

    Tiger Sport Tiger 900 After Market Exhaust.

    Gern, Oct 15, 2024, in forum: Tiger / Explorer
    Replies:
    0
    Views:
    71
    Gern
    Oct 15, 2024
  4. Nigel David Smith

    Triumph Tiger 800xc Instrument Panel Glass

    Nigel David Smith, Oct 6, 2024, in forum: Technical Help
    Replies:
    0
    Views:
    38
    Nigel David Smith
    Oct 6, 2024
  5. Markus McMillin

    1973 Triumph Tiger - High Oil Pressure In In-frame Oil Tank

    Markus McMillin, Oct 5, 2024, in forum: Vintage Classics
    Replies:
    1
    Views:
    230
    speedrattle
    Oct 13, 2024

Share This Page

Sign up