Thruxton Jacking Up Front

Discussion in 'Thruxton, Scrambler & Trident' started by TonyG, Dec 16, 2022.

  1. TonyG

    TonyG Noble Member

    Dec 1, 2016
    822
    443
    Bucks
    #1 TonyG, Dec 16, 2022
    Hi,

    I presume it is ok to jack up a 1200 Thruxton at the front under the frame rails? There seems to be 2 lugs at the front as well, so would they be a good point to pick?

    Just want to remove the front wheel to replace the discs. Another question, is there any need to tap out the carrier holes for the disc mounting to remove any old threadlock, as I don't have any taps?

    Thanks

    Tony
     
  2. Pegscraper

    Pegscraper Elite Member

    Jun 12, 2020
    3,283
    800
    Yorkshire
    #2 Pegscraper, Dec 16, 2022
    Jacking up the bike with the frame rails shouldn't be a problem. Just use make sure no weight is on the engine or exhaust etc. Supporting the rear of the bike on a paddock stand will help stability and share the weight.
    Just clean the disc bolts of old loctite, the holes should be OK. If you must clean them out use a thread chaser, not a tap. A tap will also remove some metal from the threads no matter how careful you are, unlike a chaser.
     
  3. TonyG

    TonyG Noble Member

    Dec 1, 2016
    822
    443
    Bucks
    #3 TonyG, Dec 16, 2022
    Thanks.
    I haven't got a paddock stand but do have one of those little scissor jacks with 2 little U shaped stands on it, one for each frame rail. Hopefully that will be stable enough alone at the front, I'm sure I've lifted front of my 865 Bonnie before like that.
     
  4. NatM

    NatM New Member

    Feb 25, 2021
    9
    3
    Bushmills
    #4 NatM, Dec 17, 2022
    IMG_20221217_124008.jpg
     
  5. nickjaxe

    nickjaxe Active Member

    Sep 2, 2020
    64
    28
    Cheshire UK
    #5 nickjaxe, Dec 19, 2022
    My bike has a rear stand.....so with it on its rear stand then with my trolley jack and a length of wood across the 2 frame wheels far forward as is safe I lift the front like that....
     
  6. TonyG

    TonyG Noble Member

    Dec 1, 2016
    822
    443
    Bucks
    #6 TonyG, Dec 19, 2022
    I only have a scissor jack with 2 u shaped attachments which can be adjusted to cradle the 2 frame rails. I think I will just jack it behind the 2 bash plate mounting brackets at the front of the frame. I don't have anything to steady the rear wheel with but tried it out on my 865 Bonneville and that seemed secure enough for removing the front wheel. I'll loosen the axle etc., before jacking it up, and likewise torque it down after dropping it down off the jack so won't be doing anything more active than removing the axle and wheel.
    Thanks
     
  7. FellZebra

    FellZebra Elite Member

    Mar 9, 2020
    3,233
    800
    Cheshire, UK
    #7 FellZebra, Dec 19, 2022
    Had the forks out of mine once. To do this I bolted a longer than frame width piece of angle iron across those 2 lugs on the lower frame and then jacked it up and put it on axle stands. This combined with rear paddock stand was very stable.

    1D47636B-F88E-4E60-9B18-E8EC34435872.jpeg
     
  8. TonyG

    TonyG Noble Member

    Dec 1, 2016
    822
    443
    Bucks
    #8 TonyG, Dec 19, 2022
    That's a good idea about bolting a bar to the mounting lugs.
    On another point, do you have to remove the rear wheel to get the rear caliper off for cleaning and a pad change?
     
  9. FellZebra

    FellZebra Elite Member

    Mar 9, 2020
    3,233
    800
    Cheshire, UK
    #9 FellZebra, Dec 19, 2022
    Yes, a pad change is a wheel out job unfortunately. Not the best design but far easier with a rear paddock stand
     
  10. Iceman

    Iceman Crème de la Crème

    Apr 19, 2020
    2,391
    1,000
    Lancashire
    #10 Iceman, Dec 19, 2022
    If you plan on doing your own servicing and repairs it may be worth seriously thinking of buying an Abba Stand, if it's a quick job I use Moto GP front and rear stands.

    thumbnail_IMG_1508.jpg

    thumbnail_IMG_1509.jpg
     
    • Agree Agree x 1
  11. Pegscraper

    Pegscraper Elite Member

    Jun 12, 2020
    3,283
    800
    Yorkshire
    #11 Pegscraper, Dec 19, 2022
    I treated myself to an ABBA Skylift some years back for the ZZR. They're quite expensive but very versatile, especially with a heavy bike like the Z.
     
    • Like Like x 1
  12. Ge-Minigun

    Ge-Minigun Active Member

    Sep 20, 2021
    119
    33
    Virginia (USA)
    #12 Ge-Minigun, Dec 20, 2022
    The ABBA is nice, but no love for the Thruxton...cheaper than a front and rear stand.
     
  13. Kiwidave4

    Kiwidave4 Well-Known Member

    Nov 12, 2016
    227
    83
    Wellington, New Zealand
    #13 Kiwidave4, Dec 21, 2022
    When I bought the Thruxton I already had an ABBA stand for my VTR so made some adaptors to suit. Used in conjunction with a bottle jack and a piece of wood it makes a very stable lift that is great for long jobs where the bike has to be in the air for a few days.

    Recently treated myself to a cheap hydraulic lift as I plan to pull the swing arm out. I am not totally confident about the stability when raised but it is certainly convenient.

    20200928_161908.jpeg

    IMG_1268.jpeg
     
  14. brown mouse

    brown mouse Elite Member

    Sep 15, 2018
    2,288
    943
    East Midlands, UK
    #14 brown mouse, Dec 21, 2022
    I use jack and a a bit of two-by-four under the engine cradle and if I need extra stability lower that onto a few bricks. Together with a rear paddock stand that lets me get either wheel off. However, when I needed to get rear suspension out, needed to buy a front paddock stand as well....

    1.jpg

    (Rear stand above is just taking weight of dangling swingarm)
     
  15. TonyG

    TonyG Noble Member

    Dec 1, 2016
    822
    443
    Bucks
    #15 TonyG, Dec 21, 2022
    Thanks everyone.
    I tried jacking it up with my scissor jack and the 2 U shaped mounts on the frame rails just behind the bash plate brackets. It seemed steady enough for my purposes, I'll also put a block of wood in each end of the scissor jack in case it fails. I could just use the jack without the U shaped mounts across the 2 bash plate brackets, but they seemed more delicate than the actual frame mounts.
    Happy Christmas.
     
Loading...
Similar Threads - Jacking Front
  1. Zoso

    Jacking Up A Thunderbird

    Zoso, Sep 29, 2017, in forum: Thunderbird
    Replies:
    28
    Views:
    16,049
    Rick Fisk
    Apr 15, 2021
  2. Joey

    speedmaster jacking point

    Joey, Oct 11, 2016, in forum: Technical Help
    Replies:
    7
    Views:
    3,986
    v8dve
    Oct 19, 2016
  3. Scoot65

    Wheel Chock Size V Front Wheel Size

    Scoot65, Dec 11, 2024, in forum: Triumph General Discussion
    Replies:
    5
    Views:
    625
    Bolosun
    Dec 18, 2024 at 8:56 AM
  4. Oldjeep

    Wanted - Front And Rear Seats For 2003 Speed Triple

    Oldjeep, Dec 6, 2024, in forum: Wanted
    Replies:
    2
    Views:
    345
    Oldjeep
    Dec 10, 2024
  5. MoreCowbell

    2 Mystery Plugs On The Front Of My 2016 Bonneville T-100 Engine

    MoreCowbell, Sep 25, 2024, in forum: Technical Help
    Replies:
    5
    Views:
    522
    nickjaxe
    Sep 30, 2024

Share This Page

Sign up