Spare Parts

These guys are pretty good and deliver quickly:
https://www.pro-bolt.com/

 

No profit in a couple of shitty little screws but big mark up on a jacket/ helmet etc.

 

Items like that can be had very cheaply from your local fastener suppliers.

 

Funny enough a friend of a friend of mine called the other week for a coolant flush on his zx9 after some overheating issues.
I pointed out someone had damaged his brake caliper bolt and with him having had recent tyres it was probably done on the last tyre change no doubt.



I didn't have any M10 x 1.25P bolts ( M10 x 1.5P being the ISO standard as in the longer bolt below) so single point cut him a new one on the lathe from a stock cap head.

 

Hi All ! How about this for shxxt ' service ' .....Last week some thieving B tried to steal my beloved 2008 Bonneville........They were disturbed ( and didn't manage to steal the bike ) but did however damage the ign lock assembly...
I contacted my local Triumph main dealer in Bristol.... Sorry not available until Feb next year !!!!
Unbelievable my bike will be unusable for a third of a year......
This has damaged my confidence in the 'brand' .......
( It's part number is : T 2500803 .... If there is one tucked away somewhere )

The garage is now protected by a grenade !

Safe riding all .....

Robin

 

Thanks for your reply Mick.... I have e -mailed Mr Bloor direct regarding this crxp service for such a recognised brand. The after sales service team have now been in touch (!) and I am hoping their helpful chap Carl may be able to assist.........?

4 months to not be able to use the Bonneville ...... as no replacement ignition assembly is available !

I had 4 BMW 's prior to moving to Triumph......... My confidence in the brand is ' under consideration ' .....I was contemplating a new Bonneville .....but we'll ?
Eyes Robin

 

I have a 2008 Bonney you should be able to use any on of ignition I would go to an auto electrican and see what they can do this place in Brisbane Queensland Aus ,will have a second hand switch and get it there quicker than 4 months

 

I have a 2008 Bonney you should be able to use any on of ignition I would go to an auto electrican and see what they can do this place in Brisbane Queensland Aus ,will have a second hand switch and get it there quicker than 4 months

 

didn't load first reply

 

Thank You so very much for his info ...... Much appreciated...
Kind regards Robin

 

Just think how many parts there are on any one model then multiply by the number of models and then by the discontinued models and then calculate the size of the warehouse needed to stock all these parts then complain about availability???

 

Thank you for your 'reply' ! ......I do hope you are not deprived of using your machine for over FOUR months , due to a fairly standard part ( an ignition barrel ) in my case , not being available.....until February 2023 !
Duty of care to Triumph Customers ....... ? I would suggest quite a few Bonnevilles have been produced ..........( perhaps the fact that we as a Country don't make so much these days , it's all been outsourced overseas )?
( Thank You to Forum 'Folks' who have made HELPFUL suggestions as to sourcing the part that will enable me to get the Bonnie back on the road where it belongs ) Appreciated !