Bonneville Low Oil Pressure

Discussion in 'Technical Help' started by Stephen Mallett, May 4, 2022.

  1. Stephen Mallett

    Stephen Mallett New Member

    May 4, 2022
    1
    3
    Rochester
    Hi ,I have a 2006 ,790 cc bonny with a Bob Farnham 900 cc conversion. It's done 86000 miles and always serviced on time, uses no oil. Recently I've been getting the oil pressure alarm come on in slow ,heavy traffic .
    Being optimistic I'm hoping it's the oil pressure release valve and not the main bearings etc.Is it possible to do an oil pressure check by means of a remote oil pressure gauge..and where would I plumb it to the engine??
    All idease welcome
    cheers Mallettscone
     
    • Agree Agree x 1
  2. SPC1

    SPC1 Well-Known Member

    Mar 16, 2019
    40
    68
    UK
    Easiest is remove the oil pressure switch and plumb the gauge in there.
    Your problem is probably only a faulty oil pressure switch, they don't last forever. The switch is only £12 from Fowlers parts so I'd try that first. Part number is T1210504.
    Steve.
     
    • Agree Agree x 1
  3. Stephen Mallett

    Stephen Mallett New Member

    May 4, 2022
    1
    3
    Rochester
    Many thanks, SPC1, have ordered a switch from Fowlers
     
    • Agree Agree x 1
  4. joe mc donald

    Subscriber

    Dec 26, 2014
    14,433
    1,000
    slough / burnham
    Stephen Mallett
    Yes sounds like a good start there. Do let us all know the result. In the meantime do hit the upload a file button bottom right corner and show the inmates the steed. And of course welcome to the family.
    Joe.
     
    • Agree Agree x 1
Loading...

Share This Page