Please Help! I Am Trying To Remove The Datatool Alarm From My Bike!

Thank you for any help in advance.

I have checked some videos online and got answers to some questions. It looks not very complicated. I get a Triumph bypass plug. I will unplug the alarm and plug the bypass on the switch. But I found there is an electronic part under my rear seat which as shown in the photo below. It connects to the alarm directly. I am not sure if It's a movement/nudge sensor that is a part of the alarm. Can I just remove it with the alarm?

 

It's just a magnetic seat removal sensor, just take it off with the alarm.
There should be a corresponding bit on the seat to take off.

 

Alom
Question answered. Have fun.
Joe.

 

Thanks a lot. I have unplugged it.

 

yep. cheers. will go-ahead to remove heat grips and order lots of parts from ebay......hahahaha........