Front Sprocket Oil Leak

Discussion in 'Technical Help' started by Wayne R, Feb 7, 2022.

  1. Wayne R

    Wayne R New Member

    May 1, 2019
    0
    1
    Prestatyn
    I have 2014 triumph tiger sport, I have just changed my chain and sprockets and have noticed a small amount of oil which I think has come from behind the spline that the front sprocket seats on. My question is, is there a seal that has worn around the spline ? I have searched in my Haynes manual and can't see anything, and can't seem to find anything online, can anyone help me shed some light on this please.
     
  2. capt

    capt Elite Member

    May 8, 2016
    3,050
    750
    western Australia
    There is a seal !
    There is always a seal , on any motor cycle , otherwise the engine oil will just flow through the output shafts bearings.
     
    • Like Like x 1
  3. Wayne R

    Wayne R New Member

    May 1, 2019
    0
    1
    Prestatyn
    Thanks for your reply, I thought there would be just surprised not to find any youtube videos on replacing one as normally I can find anything I need
     
  4. Pegscraper

    Pegscraper Elite Member

    Jun 12, 2020
    3,269
    800
    Yorkshire
    Usually, the output shaft seal just taps into the crankcase from the outside. I'd be very surprised if your Tiger is any different.
     
    • Like Like x 1
  5. Samsgrandad

    Samsgrandad Senior Member

    Dec 15, 2019
    577
    243
    Somerset
    Having looked at Fowlers website, www.fowlersparts.co.uk it would appear that the oil seal you are looking for is part number :- T3600112
     
    • Like Like x 1
Loading...

Share This Page