Featured Triumph Bonnie Owner At Last-t140 Project

It'll be fine, those impact wrenches fetch 'em straight out. Here's two of the little uns

 

First of all use a small drill bit and remove the indent used to lock it in place, then warm crank gently, i use a drag link socket and air gun to remove mine, never fails. Best idea if you don't have the tool is to use a local engineering company just remove it for you

 

16mm drag link socket that i use.

 

Yep, drill the centre punch out first. Blokes I know would have centre punched a second time to show that the plug had been out and cleaned - I've seen them with 3 or 4 punches but I just replace with the Allen key ones now.

To get the little puckers out I use one of these that fit the full width of the slot:



Rounded off to fit as the slot is rounded in the bottom



And then attach to one of these. Hand ones that you smack with a hammer are ok but take ages as the plug is tight all the way out and the bits they supply in the set are rubbish

 

Can you please explain in more detail next time as old gits only see the first pic and then go detail blind

 

If you look closely you'll see when you've drilled enough. Get to the bottom of the punched hole so no metal is straddling (that's an excellent word for it I think) the join and you are good to go. If you've got an electric or air impact driver then it'll be fine.
I'm always amazed at how outstanding that impact driver is. Those really irritating and almost impossible unremovable nuts just fly off.
I honestly had a 6 foot scaffold pole over the tommy bar on the crank on a miserable Harley chop and it wouldn't budge. Borrowed one of these and it came off so easily that I was sure that I'd loosened it before. I went out and bought one the same day. It doesn't come out to play much but when it's let out you'd better be ready to be agogged (another good word)

 

Ray
All looking good my man. I know the sludge trap is a pain but just wouldn't like to think of the problems if not done.

 

Very nice.

 

Looking good

 

Yes, looking very nice

 

I’ve just seen this thread for the first time today. The bike looks great. Well done!