Dual Disc Street Twin Upgrade

All it takes is money. ...J.D.

 

I simply installed fully sintered brake pads (EBC HH) on my 2018 Street Twin. Made quite a difference.

 

Yes. Low cost and definite improvement.

 

I’m late to this thread but I have the same question. It’s a spendy exercise but I’m putting some spoked wheels on the Street Twin so I’d hit it in one punch. interested to know of the Speed Twin forks fit straight in.

 

Seems I'm late to this thread too!.
I have a 4 pot Brembo caliper/floating disk conversion for the Street Twin which I'm seeking due to change of vehicle. It's basically a straight forward swap of parts with a slight reroute of cable and house. The kit cost over €400 but I'm selling for £80 Inc post. It's done about 3000 miles. I have included photos on here before it you can look up in for sale.
I managed to get hold of one of the last floating disks from Triumph which was a good improvement over the original disk. I have that for sale also, virtually unused no mileage on it apart from movement in the shop .

 

Interested to see a pic for sure

 

Doesn't the 2019 ST have the same Brembo front setup as the Street Scrambler? With the right pads you can stand the SS on it's nose so it neither needs or can use any more stopping power TBH. I'm not surprised the dealer wasn't very forthcoming about swapping brake parts between models, they're probably scared to death of being held liable if it goes pear shaped and "the dealer said it would be OK" is put on the claim form!