No Spark, Bonneville 2003

Discussion in 'Technical Help' started by Ola, Aug 12, 2020.

  1. Ola

    Ola New Member

    Nov 20, 2019
    17
    3
    Sweden
    #1 Ola, Aug 12, 2020
    Hi,
    I have trouble with my Bonneville 2003 . I have no spark and my local Triumph dealer can not find the problem so they told thatb it was 95% the CDI and then I changed that and still no spark. I have measured the coils and they seem ok. Ihave new ignition cables and new NGK Caps as original....
     
  2. Wishbone

    Wishbone First Class Member

    Nov 4, 2018
    865
    643
    Essex UK
    #2 Wishbone, Aug 12, 2020
    • Like Like x 1
  3. Wishbone

    Wishbone First Class Member

    Nov 4, 2018
    865
    643
    Essex UK
    #3 Wishbone, Aug 12, 2020
    • Like Like x 1
  4. Wishbone

    Wishbone First Class Member

    Nov 4, 2018
    865
    643
    Essex UK
    #4 Wishbone, Aug 12, 2020
    upload_2020-8-12_19-2-51.png
     
    • Like Like x 1
  5. Ola

    Ola New Member

    Nov 20, 2019
    17
    3
    Sweden
    #5 Ola, Aug 19, 2020
    Hi,
    Now i measured the coil again, and I seem to have 8,5 k Ohm on the secondary side....Is this to low?
    I have 5-6 ohms on the primary side.
     
  6. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,358
    800
    Nr Biggar
    #6 Callumity, Aug 19, 2020
    The ignition coil values are not always reliable. The HT value is about 18-20k ohms between outputs (minus HT leads) and the LT about 8-9k. The fact yours is low might indicate an internal break. The best replacement is the PVL originally used on BMW twins -
    PVL PART 356 1 OO
    https://www.triumphparts.co.uk/product/ignition-coil-pvl-1200-models-and-bonneville-800-865/ If you can’t find one in Sweden.

    The pick up coil should be about 570 ohms. It is easiest measured at the 2 pin connection just to the right of the battery and slightly below (under side cover)

    Another worthwhile check, ignition on, is that you have battery voltage to the ignition coil +ve terminal.

    HT - High Tension
    LT - Low Tension i.e. battery voltage
     
  7. Ola

    Ola New Member

    Nov 20, 2019
    17
    3
    Sweden
    #7 Ola, Aug 27, 2020
    Thank you for all the help, It was a problem with the side stand switch. Now It is working again....:)
     
    • Like Like x 2
  8. Wishbone

    Wishbone First Class Member

    Nov 4, 2018
    865
    643
    Essex UK
    #8 Wishbone, Aug 27, 2020
    Great news and thanks for giving the solution:)
     
  9. Thripster

    Thripster Elite Member

    Feb 21, 2020
    1,061
    750
    Northampton, UK
    #9 Thripster, Aug 27, 2020
    Very surprised that the dealer wasn't able to find that........hope they didn't charge you anything for saying they didn't know what the problem is!
     
    • Agree Agree x 2
Loading...
Similar Threads - Spark Bonneville 2003
  1. DGBland

    Best Spark Plugs T100 Bonneville

    DGBland, Mar 8, 2022, in forum: Bonneville
    Replies:
    14
    Views:
    3,695
    capt
    Mar 14, 2022
  2. adrien coquelet

    2006 Bonneville 790, No Spark, Ignition Control Unit Defective?

    adrien coquelet, Jan 3, 2019, in forum: Technical Help
    Replies:
    20
    Views:
    9,529
    Can Atalay
    Dec 19, 2023
  3. Eric27

    No Spark When Handlebar Moves

    Eric27, Aug 4, 2024, in forum: Technical Help
    Replies:
    7
    Views:
    784
    joe mc donald
    Aug 25, 2024
  4. Chris Fenoulhet

    Spark Plug Colour Opinions Please

    Chris Fenoulhet, Dec 16, 2023, in forum: Vintage Classics
    Replies:
    5
    Views:
    922
    speedrattle
    Dec 23, 2023
  5. Chopchopth

    (help) Oil Leak, Spark Plug Arcing, Lost Power, Mil P0151

    Chopchopth, Oct 28, 2023, in forum: Bonneville
    Replies:
    3
    Views:
    1,166
    Pegscraper
    Oct 30, 2023

Share This Page

Sign up