Anyone Fitted Handlebar Risers To The 2018/19 Speed Triple?

I fitted the SW Motech risers to my Street and liked the added height, but I don’t see anything specific to our bikes yet. I’ll probably do the same to the RS at some point.

 

I fitted some 20mm spacers, I had left over from when I raised my Busa bars, to my RS, cost about £5 originally

Was going to swap them for some proper risers at some point but, as it would be a purely cosmetic change and cost a fair bit, didn't bother.

 

Nope no problem that I remember.
You will need longer bolts as well though.

 

i will be fitting spacers in march had some made 20 and 25 mm with longer bolts will report back after my winter trundle in the south of spain. fitted rizoma ones to my 2016/18 speed r and they helped but thought that the bar clamp was too nice to get rid of on the rs. im hoping the 25 mm ones will be ok regarding clutch/brake lines.

 

Made some 30 mm when I had a 16 speedy s and found that to be the limit for the cables etc

 

thats good to know rocker cheers

 

Pro Taper fat bars, sorry to hijack the post but if you are reading this then maybe one of my fellow triplets may have fitted Pro taper fat bars, if so has it been of benefit

 

Hey mate, came across this link in another thread, not sure if it will have the handlebar risers though; but it had the parts i needed: https://www.worldoftriumph.com/partscatalog/catalog/browse/catalog/triumphmc/modelid/610315/

 

Hi Steve RS, please will you let me know which SW Motech risers you fitted to your street. I have a 2018 street triple RS and I am looking to raise the bars a little.

 

Hi was thinking of getting some 22mm risers for my 2018 speed triple rs they bolt to the lower mount any issues with cable free play at all
Thanks
Rob

 

I had 20mm spacers on my Speed RS with no problem.

 

Cool will order some of these

 

I just refitted the 30mm ones that came in my bike. Been about a year so thought I would give them a try to see which I prefer.