Screen Photos. Fly V Aftermarket V No Screen

I have the optional factory fly screen on my 2017 S3 and as you say, I like the look but it provides very little wind and rain protection for longer distance rides. It'll be interesting to see what options others have come up with.

 

Mike2105.
Screens are like you say personal. Here is my street triple and my Bonnie's The street Triple is really good and protects fairly well. I am happy with it.
Ride Safe and enjoy
Joe.

 

My Speeds screen. Personally I don't think they look right without one!

 

Two screens! Big one is the puig tour one and the black one under is a powerbronze one.

Only reason for two is I couldn’t be bothered to remove the powerbronze one as the puig one uses different mounting points.
Both work well btw on their own

 

I like the look of the Powerbronze one. It looks taller then the Triumph option.

 

Hi there, it’s about 4 inches longer than the triumph one but if you go for it, the display (if you have a tft) thinks it’s dark for most of the time so I’ve had to set it to high contrast all of the time. Recommended though.

 

Thanks for the feedback.

 

Put the dart one on mine,fits and looks OK,not sure if it does much though.

 

Since I installed the air conditioning, my screen attracts so many (jealous?) looks.

 

How does the Powerbronze compare to the Puig for keeping the Wind off you at speed?
Cheers.

 

Only my opinion, but all the screens available for the speed triple are simply too small to have much effect.
They do a good job keeping the rain off the clocks though!

 

Has anyone tried a GP Kompozit screen or one of these deflectors type that attach to the top of another screen on their Speed Triple?

https://www.amazon.co.uk/dp/B0852P8...colid=K4U1DUHPTGL4&psc=1&ref_=lv_ov_lig_dp_it

https://www.ebay.co.uk/itm/Motorcyc...e=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649

 

What kind of hand guards are those? Been thinking about something like this for winter months.
So I don’t completely hijack this thread, here is my dark Puig.

 

What kind of hand guards are those? Been thinking about something like this for winter months.
So I don’t completely hijack this thread, here is my dark Puig.

 

looks good!
The hand guards are sw motech ones but with the optional extension bits.
Definitely great in the winter and with heated grips on.
And, if you do get them, you have to take out the pin that goes into the end of the handlebars (3mm)
I cannot recommend enough that you don't do it as its a right pain in the arse (ass?) and probably doesn't need doing!
I think you could get away with a longer screw of the original size as all the supplied bracket does is to increase the screw size to larger.

 

Hi there,
I purchased a puig clamp on type one (in clear).
Didn't seem to make much difference to me.
I clamped it onto the official triumph one

 

I went for the Powerbronze in light tint in the end. Very easy to fit. Not ridden it yet.

 

Definitely makes a difference and a good choice!
Bike looks sweet too!

 

I swapped from the Triumph one to the tinted Powerbronze on my 2012