How On Earth

Had the same problem last night while out bloodbiking, frigging rain drips down the inside of the visor on my hjc

 

Mr Sheen is great. Polish your visor with it and the rain beads up and runs off easily.
As for fogging up, I just crack the visor open slightly. Have never got on very well with Pinlocks. I had some success with a Foggy mask insert but find them a bit claustrophobic.

 

As already mentioned, Pinlock system works really well to stop inside steaming up, explanation below;

The inner part of the Pinlock is lined with a silicon bead, which creates a double glazed window type of effect when the Pinlock visor insert is attached to the helmet visor. The pocket of air that is trapped in between the visors acts as an insulator for the inside temperatures in the motorcycle helmet.

For the outside, try a spray like that in link below, this is a coating that allows quicker dispersion of the rain from your visor, just turn your head to the side every few secs & the water flies off.

https://www.sportsbikeshop.co.uk/mo...MI9ervt-_g4gIVbrXtCh3DQQ3BEAQYBCABEgLfMfD_BwE

 

As previously mentioned, there are some helpful ideas, but its just not fun. Certainly seeing where you are going is a priority, then there are a host of other problems which go towards making riding in foul conditions unpleasant. We motorcyclists are vulnerable at the best of times, but I feel quite relieved to get to my destination in foul weather.

 

I use RainX on the outside of the visor
Pinlock system on the inside but cleaned and treated with RainX AntiFog
Vents open on the helmet and so long as you are moving there is airflow keeping things fresh
I also have the wind jammer round the base of the helmet
My jacket also has the storm gusset at the front to deflect rain from the neck
I too rode in the downpoor yesterday and while car drivers had their wipers going full speed I was overtaking them with good visibility and completely dry (Michelin road 5 tyres are fantastic when dealing with surface water)
Good kit and treating it right really is a life saver.

 

I used to get water dripping down the inside of the visor, I used to just close the visor but realised it needs pressing closed to form a seal with the rubber strip accros the top
So now an extra push to close it and now no more water on the inside
Also a very light coating of red rubber grease on the rubber strip helps keep it supple

This is on my Shark Spartan helmet, may be different with other helmets of course

 

Not a lot of fun riding in shite conditions mate, came back from Germany in heavy storms & high winds a few years back, 8 hours back to Calais, then no ferries sailing for 3 hrs due to sea conditions, nowhere to get out of the weather deep joy!
We then had a 'bumpy' crossing back to Dover & a 2.5 journey back to Southampton in the pissing rain!
Always sailed from Portsmouth after that trip!

 

Pull your neck tube/scarf over your nose.Stops your breath fogging.

 

Or washing-up liquid.

 

I find that, as someone mentioned above, a light smear of washing up liquid/soap helps. You have to wipe it off and re-apply fairly frequently though. It won't help much if you already have a pinlock fitted though.

 

Do 150 mph and turn your head.

 

Most bikes, screens and visors have a uv or other similar coating. Many years ago a used Rain X on the screen of a BMW R bike and after a few days the coating on the screen started to craze and eventually pealed off. Car windshields ok but not on a bike or visor

 

Absolutely.

Speaking of which,-;

 

We know.