Led Indicator

Are they wired correct way around?
LEDs are polarity sensitive and if reverse wired the charging circuit may give them wrong current flow.

 

Do you have a multimeter?
If so disconnect one indicator and measure voltage both ignition on and engine running but also note current flow direction in both states.

 

Does the 2014 model use CAN bus? this will cause all sorts of problem when using different bulb loadings.

 

I only had success fitting led winkers when I used a genuine triumph replacement relay on a couple of bikes.

Downside is they're expensive for what they are and they need to be earthed somewhere.

 

Generally any flasher relay intended for LED bulbs should do the job some are rejected if the system uses CANbus...its a very sneaky move as the system can be tailored by the makes to be very picky with component specs, had no end of trouble with some Japanese car systems especially audio when they are integrated.