3 In To One Headers - Are They Available?

Hi there i got a set off a tiger 955i second hand to fit mine.Well i was told they were off 955i the ports are round not like the head outlet ports on motor.They cheap and do fit with a bit of fiddling.The collector point is close to engine cases but does fit.Some heat and a hammer could be needed.Or spacers at header.
Also you need to space radiator hose on left side.I used a spacer drilled 2 holes inch apart and works well.
Sounds the buisness.
Its like anything unless you want to spend oodles have a go, worked for me.

 

Heres photo of pipes on i get better ones in weekend if you want them

 

Who’s a clever boy then?

 

I fitted one from eBay, sold as early speed tipple. It had round ports same as the motor. Had same problem as odinz with coolant pipe, different solution, I cut the steel pipe and used a longer flexible pipe.