675 do i need to reflash my ecu

Discussion in 'Street Triple' started by 2k13streettriple, Aug 6, 2014.

  1. 2k13streettriple

    2k13streettriple New Member

    Aug 6, 2014
    0
    1
    I have a 2013 street triple and i recently purchased "SC PROJECT'S GPM2 SLIP ON EXHAUST" for my bike and since the installation i have been having this weird problem with the bike , what happens is the whenever I rev the bike suddenly the ignition goes off and this happens in every gear ... I am not really able to figure what the problem is , so do i need to tune the ecu or is it related to something entirely different..:rolleyes:
     
  2. SteveJ

    SteveJ Super Moderator

    Aug 12, 2013
    524
    113
    North Hampshire
    So I take you have just installed the exhaust and not changed the map?

    I just had a look at the comments around this exhaust from the net which have stated that quite a few that have this exhaust have loaded the Arrow map.

    Might be worth seeing if you can find someone that does Dyno / remapping work to have a look at the bike.

    Cheers

    Steve
     
  3. 2k13streettriple

    2k13streettriple New Member

    Aug 6, 2014
    0
    1
    the thing is I'm in INDIA and there is no dyno facility available , so you suggest i should go for the arrow free flow mapping?
     
  4. SteveJ

    SteveJ Super Moderator

    Aug 12, 2013
    524
    113
    North Hampshire
    From what I have read with regards to this exhaust this seems to be the way forward that most people have suggested

    Cheers

    Steve
     
  5. 2k13streettriple

    2k13streettriple New Member

    Aug 6, 2014
    0
    1
Loading...

Share This Page