triumph adventurer 900

Discussion in 'Technical Help' started by moonraker, Apr 26, 2014.

  1. moonraker

    moonraker New Member

    May 25, 2013
    2
    1
    wiltshire
    hi,alarm worrys, starting motor dead,checked all switches, battery and fuses. alarm is dead,no light flashing plus, nought when fob pressed,think it is fitted with a datatool 2 alarm,any help would be great.
     
  2. sprintdave

    sprintdave Nurse, think it's time for his medications.
    Subscriber

    May 25, 2014
    1,548
    750
    Birmingham
    new member here. First thing to do from looking on other forums is remove the alarm, most people think they cause problems. make sure battery is reading over 12.5 v,any less, forget it, been there done that. Check you havent switched the kill switch of. spray with wd40 all connections to switches. sorry thats all i know
     
  3. moonraker

    moonraker New Member

    May 25, 2013
    2
    1
    wiltshire
    sprint dave, thanks very much for your help, after playing around with 900 dont know how but its running o.k now,thanks again.moonraker.
     
  4. sprintdave

    sprintdave Nurse, think it's time for his medications.
    Subscriber

    May 25, 2014
    1,548
    750
    Birmingham
    good luck moonraker. they are a great bike when running,lol. keep the faith
     
  5. Richard H

    Richard H Noble Member

    Oct 26, 2012
    1,132
    300
    Swadlincote Derbyshire England
    Always found alarms cause more hassle than they are worth, a Meta one stranded me and my then Bandit at the NEC bike show many years ago.
     
Loading...

Share This Page