Cleaning, polishing and blinging Tips

Always use Autosmart cleaning products personally, mainly because i get them free Plus most of their products are just as good if not better than Autoglym.

http://www.autosmart.co.uk/

Hazsafe TFR to get the grime off, Autowash shampoo to wash it, Tardis to remove any tar deposits then polish with Platinum or Mirror Image. Dress plastics with Pazzaz or Tango. Then apply Supaguard Paint Protection to tank & fenders, Supaguard Leather Care to the seats. Glass Glow on the speedo/tacho glass plus light lenses & headlight, aerosol can of Stardust to buff up all the chrome :upyeah:

WARNING!!!! Do not dress the tyres with tyre slick!Trust me, ive seen it done & the end result is not pretty

 

What tricks do you wanna know Jim? I was Autoglym trained a few years back & also spent time doing smart repairs.

 

:upyeah: I was in the trade for some years myself, plus have shown bikes and classic cars over the years. my tip is once you have finished cleaning and polishing and its been under the sheet for a week or 2, and you want to bring it back to that just cleaned look. I use AUTO GLYM instant show shine. Its for paintwork,plastics, perspex, vinyl and rubber. spray all over and buff up. J D !

 

Same product as Stardust :upyeah:

 

Please don't shout at me but here we go:
Warm water & fairy liquid.
Jet wash kept away from electrics and bearings.
Petrol leaf blower to dry the bike. (no idea why I get strange looks from my neighbours)
A polish with Mr Sheene
Lube the chain (not that dry lube stuff)

 

Seriously mate.... DO NOT USE FAIRY LIQUID TO CLEAN YOUR BIKE

That is seriously strong stuff & will take all the protection previously applied to your paintwork clean off, polish, wax the lot! Leaving your paintwork completely unprotected from the elements.
Have you ever seen what that shit does to a greasy frying pan, it is a very strong de-greaser & can damage rubber too by drying it out due to its salt content. All fairy liquid type products contain salt as its used as a thickening agent otherwise it would be really runny. The salt will speed up the corrosion process of any bare & unprotected metals on your bike.
Now think about it..... Will you use it on your pride & joy again?

Regarding Mr.Sheen... Its ok as a dressing polish but its no replacement for a real wax/polish to be honest & provides very limited protection against the elements. At the end of the day its what the wife uses when shes dusting around the house which doesnt need protecting from the weather. Mr.Sheen type products are used in the trade on showroom vehicles that have already had their coats of polish & Mr.Sheen is just used on a daily basis to remove greasy finger prints etc.
Mr.Sheen is basically a can of silicon & is known in the trade as bullshit in a can. Quick & easy to apply, looks like the car has been polished, smells like its been polished, water beads up & runs off like its been polished BUT isnt a polish & provides very little if any protection.

Also, just a personal opinion but why lube a chain after you have cleaned the bike. The best time to lube your chain is after a ride out when the chain is still warm. That way the lube will thin itself out & get into all the little nooks & crannies.

 

Never knew fairly liquid was so leathal. Guess you can learn something from an Internet forum:upyeah:

 

Every day`s a school day mate :smile:

 

Motorcycle screens & helmet visors are not very scratch resistant & removing bugs in the summer months can easily scratch the plastic.
When you get home from a ride out, get a clean damp towel & drape it over the screen/visor & leave it for a while. The moisture from the towel will soak into the bugs & make them easy to wipe off. Then clean the screen/visor with a glass cleaner of your choice & a micro-fibre or micro-optic cloth. Do not use tissue as its quite coarse & can scratch soft plastics quite easily.

The above method can also be using on motorcycle fairings.

 

Hi Jim,

Any glass cleaner will do as long as its not the cream variety. Alcohol based glass cleaners work best as they "flash" off.

Regarding the matt finish helmet, personally i would clean with warm soapy water. Never been too keen on using chemicals on crash helmets & glass cleaner for the visor. I always use a polish on my visors too as this helps water bead up & slide off when riding.

As for stone chips, if you are a starting with immaculate paintwork then you can simply apply clear vinyl film to the main impact areas for protection.

The best way to get rid of stone chips is to just simply touch them in with the correct colour-matched paint. NEVER use the touch up brush that comes with it, the footprint is too big & will make the stone chip unsightly... I use a pin or a the end of a paper clip, that way you can drop the paint directly into the stone chip.
If a panel has quite a few stone chips then its best to just get it resprayed then apply the protective clear vinyl film.

As for the satin finish carbon fibre. Once the bike is washed, clean with alcohol based glass cleaner to rid of any other impurities Then dress with a plastic dressing. These can be purchased in a matt or silk finish. Alternatively a silicon based product like Mr.Sheen, Autosmart Stardust or similar product from Autoglym etc will do the job.

Always read the labels, one of the Autoglym dressing products (cant remember which one) after spraying on you can either (a) leave it to dry naturally for a matt finish or (b) buff to a shine.

Hope this helps Jim

 

Top advice... P19DJG
I sometimes use Wurth Active Bodywork cleaner... Very easy to use and it keeps the bugs down.... Spray on wipe off...
After a quick blast it saves a full on wash...
Dont get me wrong it's no substitute for a proper wash but it does a decent job in between....

 

I,ve been using vulcanet bike wipes for a quick "touch up clean and find them fantastic,you can clean screens, engine, wheels ,paintwork, chrome the whole lot with them. they were recommended by MCM and I got them mail order 80 wipes for £24 inc posting from Infinity motorcycles, I use 2 to keep my bike clean and simply buff up with microfibre cloth supplied, BRILLIANT product.

 

on black plastic and switch gear etc i have always used auto glym black bumper restorer (i will find the proper name tomorrow, not going out now). Best stuff i have found for that kind of thing, comes up ace. I also use their polish or i have 'mer' polish as well, although that sure isn't as good as the ads made out.

 

met a guy today on a rideout who told me "back to black" is brilliant on black plastic and even black engine parts, not sure who manufacturer is ?

 

Back to Black was a single released by Amy Whinehouse in 2007. It was also the title for her 2nd album which was also the last album released in her life time. R.I.P Amy, you were such a talent & taken from us much too soon :frown:

But on a different note the other Back to Black is made by Simoniz. :wink:

 

Unlike Amy's album, Back to Black by Simoniz wasn't that impressive. In my opinion.