time for new chain???

Discussion in 'Technical Help' started by MonkeyRyder, Mar 11, 2014.

  1. MonkeyRyder

    MonkeyRyder Member

    Jan 10, 2014
    42
    6
    Salford, Manchester
    Hi Guys,
    I tightened / lube’d my chain last night as it was getting on the slack side. I noticed about a three inch hard spot where the chain was tighter than anywhere else. Also making a rattling sound and having a slight clicking sensation on the foot rest

    Can this be fixed or is it time to get a new one? Would obviously change the sprocket at the same time. Any suggestions on what chain to buy?

    cheers
    Ric
     
  2. Speedy Stripler

    Oct 3, 2013
    43
    18
    West Midlands
    Generally if you have links that are stiff or seized then it's time to replace the chain, I would also change the sprockets at the same time so everything is nice and new at the same time and should wear at the same rate.
     
    • Like Like x 2
  3. Richard H

    Richard H Noble Member

    Oct 26, 2012
    1,132
    300
    Swadlincote Derbyshire England
    Sounds like its ready for a change. Renthal do some quality stuff.
     
    • Like Like x 1
  4. Englishman

    Englishman Member

    Nov 9, 2013
    92
    16
    Have a look at one of these new plastic chains that never need oil or replacement.

    Plastic motorbike-chains.com
     
  5. SteveJ

    SteveJ Super Moderator

    Aug 12, 2013
    524
    113
    North Hampshire
    Agree with the other guys. best to change now than wait for something to go totally wrong and end up in a pile somewhere :upyeah:
     
    • Like Like x 1
  6. Conquest Racing Ltd

    Conquest Racing Ltd Contact us for your Triumph Forum discount
    Trader

    Feb 2, 2013
    443
    313
    Dorset
    +1 change them now and the sprockets so they wear in together.
     
  7. pistonbloke

    pistonbloke Member

    Mar 5, 2013
    10
    8
    hi mate recently changed mine on hinkley 900 triple.Found the stiff spot usually occurs whilst standing over unused periods of time without spinning the wheel, then goes hard over the front sprocket. I used renthnel from A R racing that can be found on the web. They were very helpful over the phone and I had a made to measure chain. This was because I had plus the front by 1 tooth up to 19 and dropped the back by 1.This gives me lower acceleration and revs but cuts the noise down for touring, no extra miles per gallon noticed. Hope this helps, have you considered doin an oiler so as to keep the chain lush ? -Steve ( triumph adventurer 900 cc )
     
  8. MonkeyRyder

    MonkeyRyder Member

    Jan 10, 2014
    42
    6
    Salford, Manchester
    Cheers guys replaced the chain and sprockets last week, got a DID set from eBay £90 including delivery. Eventually got it on after a lot banging to mushroom it. Been out today and alls good! Cheers for all the advice :upyeah:
     
Loading...

Share This Page