Trophy Based 900 Cafe Racer

Discussion in 'Builds & Projects' started by matt botterman, Feb 19, 2016.

Page 4 of 5
  1. adethetrade

    adethetrade Active Member

    Nov 20, 2016
    114
    43
    cannock
    #61 adethetrade, May 18, 2017
    Hi nice to see it finished, I had a problem with my Trophy when turning right but it was the Choke cable not the throttle cable so check that out before ordering a new one. Ade
     
  2. Cafe Hinckley

    Cafe Hinckley Well-Known Member

    Nov 2, 2016
    176
    93
    Reading
    #62 Cafe Hinckley, May 18, 2017
    I seem to recall that TL1000 USD's were a good match and required minimal fettling but i dont think there is anything that will be a direct swap. Definitely will require new yolk.

    As always - these things are a lot easier if you have a machine shop at home but for us mere its much harder.

    Let me know how you get on - would love to attempt this one day too.
     
  3. Angus

    Angus Noble Member

    Mar 19, 2017
    936
    300
    South Africa
    #63 Angus, May 18, 2017
    Hi Matt, big up !! It came out great.
     
  4. stevethegoolie

    stevethegoolie Elite Member

    Oct 16, 2014
    2,455
    800
    East Riding of Yorkshire
    #64 stevethegoolie, May 18, 2017
    Nice one, Matt! Very impressive.:cool:
     
  5. bogg

    bogg Senior Member

    Feb 21, 2016
    300
    113
    west sussex
    #65 bogg, May 18, 2017
    Nice one Matt thats looking great,be nice to see it in the flesh
     
  6. matt botterman

    matt botterman Active Member

    Feb 4, 2016
    106
    33
    sussex
    #66 matt botterman, May 19, 2017
    Thanks all. Im can ride around safe in the knowledge that there isnt another one the same!
     
    • Like Like x 1
  7. MattGaydon

    MattGaydon Noble Member

    Jun 11, 2015
    1,097
    443
    Godalming
    #67 MattGaydon, May 19, 2017
    Looks really cool good job!
     
  8. Uncorrugated

    Uncorrugated Senior Member

    May 25, 2017
    543
    143
    Northamptonshire
    #68 Uncorrugated, May 29, 2017
    Great looking bike and a really good write up of the build.
    Thanks for sharing.
     
  9. Tal

    Tal Active Member

    Jul 3, 2017
    147
    43
    Milton Keynes
    #69 Tal, Jul 22, 2017
    [​IMG] on what Uncorrugated said.
     
  10. thebiglad

    thebiglad Old fart, still riding !

    Sep 25, 2013
    5,067
    1,000
    Central France
    #70 thebiglad, Jul 22, 2017
    Hi Matt, what an absolutely fantastic result !!!! Love it to bits, the wood effect is just extraordinary.

    Makes me think more and more about a Sprint 900 based project.
     
  11. matt botterman

    matt botterman Active Member

    Feb 4, 2016
    106
    33
    sussex
    #71 matt botterman, Jul 24, 2017
    Cant recommend the kit enough - it really is dead easy! I am eyeing up the new roadster kit as I want to build a sidecar and it could be a good option. However might try something different.

    The paint work was done by a good friend and all by hand - hes a talented bloke. He is rebuilding his fireblade and painting a mural of Tadao Baba (the lead engineer for the project) on the underside of seat - I think it will look dreadful but I know it will be done extremely well!

    I ride out with a group on Sundays for breakfast and rather than taking the sportsbike I took the cafe yesterday! Whilst It didnt quite keep up with the guys making progress on their 1000cc bikes I had the biggest smile on my face after an hour of laughing my head off laying on the tank. Its incredible as there is barely anything in your field of view in front of you so bend really feel like your flying.

    Oh and its proper cafe and very capable of doing the ton!! on a private road of course! Entering it into a show next Sunday!
     
    • Like Like x 4
    • Thanks Thanks x 1
  12. Boothy

    Boothy Active Member

    Sep 9, 2016
    117
    43
    Lancashire
    #72 Boothy, Jul 24, 2017

    Would endorse the kit and how well it is engineered and put together, looks like it could have rolled out of the Triumph factory, not "homespun" at all real professional finish.
     
  13. Uncorrugated

    Uncorrugated Senior Member

    May 25, 2017
    543
    143
    Northamptonshire
    #73 Uncorrugated, Jul 24, 2017
    Such a shame you are in Sussex - Jacks Hill cafe in Northants had their 'Ton Up' day on Sunday - a day (actually weekend) of cafe racers and more cafe racers. Mostly classics, but with a real good mix of modern off the shelf classics, mostly Triumphs. Yours would have stood out brilliantly.
     
  14. matt botterman

    matt botterman Active Member

    Feb 4, 2016
    106
    33
    sussex
    #74 matt botterman, Aug 3, 2017
    Would have been good! I went to a local pub show last weekend and got some nice comments - Going to the Sevenoaks show next month as well as the Distinguished Gentlemans ride for a pose!

    Think there is a Hastings show soon too.
     
    • Like Like x 1
  15. matt botterman

    matt botterman Active Member

    Feb 4, 2016
    106
    33
    sussex
    #75 matt botterman, Jun 19, 2018
    To finish the story of this bike I am going to taking it on track next month.
    The bike shed are running their Cafe Racer Cup at Lydden where Dad raced his Ariel which inspired this build.

    If I can just shut the thing up a little!!

    Matt
     
    • Like Like x 4
  16. Thorcusmodee

    Thorcusmodee Well-Known Member

    Jun 2, 2018
    176
    93
    Boston, Lincs
    #76 Thorcusmodee, Jul 29, 2018
    That fairing is exactly what I want for my build, where did you get it please?
     
  17. matt botterman

    matt botterman Active Member

    Feb 4, 2016
    106
    33
    sussex
    #77 matt botterman, Jul 30, 2018
    9C4CFD06-C08F-416D-8DB5-E53DD1DB43EC.jpeg
    Yeah that sounds good! Ill give it a clean after the track action. Last weekend 83D7F9B8-CADE-4C2F-90E3-8A7F0A47E9D6.jpeg
     
    • Like Like x 4
  18. matt botterman

    matt botterman Active Member

    Feb 4, 2016
    106
    33
    sussex
    #78 matt botterman, Jul 31, 2018
    I couldnt find a bikini fairing to fit because of the position of the radiator.

    However I am currently in the early stages of building a mold to create my own. If it works well I might be able to make more to fit these bikes.

    Alternative is to change the radiator for something slimmer which i think will fit the bike better anyway!
     
  19. matt botterman

    matt botterman Active Member

    Feb 4, 2016
    106
    33
    sussex
    #79 matt botterman, Jul 31, 2018
    I couldnt find a bikini fairing to fit because of the position of the radiator.

    However I am currently in the early stages of building a mold to create my own. If it works well I might be able to make more to fit these bikes.

    Alternative is to change the radiator for something slimmer which i think will fit the bike better anyway!
     
    • Like Like x 1
  20. Thorcusmodee

    Thorcusmodee Well-Known Member

    Jun 2, 2018
    176
    93
    Boston, Lincs
    #80 Thorcusmodee, Jul 31, 2018
    Thanks for that, I may well be interested in buying one :) I'm going to have a look to see what I can find but haven't found what I want so far.
     
Page 4 of 5
Loading...
Similar Threads - Trophy Based 900
  1. Angry Sky

    Triumph Trophy based bratstyle

    Angry Sky, Sep 20, 2016, in forum: Builds & Projects
    Replies:
    48
    Views:
    13,389
    Angry Sky
    Feb 13, 2019
  2. Ol' Grouch

    1996 Trophy 900 For Sale

    Ol' Grouch, Mar 31, 2025, in forum: Bikes for Sale
    Replies:
    0
    Views:
    175
    Ol' Grouch
    Mar 31, 2025
  3. Tyrone Bland

    1998 1200 Trophy Harness Connector Locations

    Tyrone Bland, Feb 10, 2025, in forum: Technical Help
    Replies:
    0
    Views:
    40
    Tyrone Bland
    Feb 10, 2025
  4. Deanus

    Trophy Triumph Trophy 1200 2001 Carb Query

    Deanus, Jan 27, 2025, in forum: Sprint & Trophy
    Replies:
    0
    Views:
    248
    Deanus
    Jan 27, 2025
  5. MikeD

    1996 Daytona (trophy) 1200cc ... Front Brake Hose

    MikeD, Jan 13, 2025, in forum: Wanted
    Replies:
    2
    Views:
    246
    Samsgrandad
    Jan 13, 2025

Share This Page

Sign up