Front Mudguard Bracket

Bensley · May 30, 2017

Hi all, I need a front mudguard mounting bracket, does anyone have one laying around they don't need anymore?

I am in the process of changing my standard front mudguard on my spoke wheel '03 T100 to a shorter version but still with the original mounting holes pre-drilled to fit an original mounting bracket.

I want to leave my original mudguard and bracket in tact in case I ever want to go back to original.

Cheers folks.

See photo for bracket in question:

GaryM · May 30, 2017

Look for one on evil bay.
As long as the bracket is in good nick the actual plastic could be knackered.

19506T · Jun 5, 2017

FYI the later Bonnevilles with the plastic fender take the same bracket as the Thruxton and Scrambler. Same fit but they have threaded holes to take screws instead of rivets.

Bensley · Jun 26, 2017

Thanks, so that means that in the attached image from:

http://www.worldoftriumph.com/trium...ck_01=&block_02=100064898-2-2&block_03=610810

item number 12, the bracket itself, has the same dimensions as the earlier pre-EFI bikes but is secured using item number 6, the alan-key bolts, instead of with rivets like the older bikes were.

I would prefer to attach the bracket using bolts instead of rivets. So if the bracket has the same dimensions (do we know this for sure) then I'll get this one instead of the one for carb bikes.

Thanks again!