Indicator connectors

Discussion in 'Technical Help' started by Thunder 990, Feb 23, 2015.

  1. Thunder 990

    Thunder 990 Member

    Dec 16, 2014
    12
    8
    I have a 2004 Speed Triple 955 and have bought some aftermarket LED indicators, the connectors on the original indicators are not your standard bullet type as on the ones I have bought and I don't want to start cutting them off the loom to replace them. I have trawled through ebay to try and find Triumph connectors and the only thing I have found is some Rizoma adaptor kits from America but they are thirty odd quid a side with postage which is not an option. Does anyone know where I can get some Triumph connectors in the UK at a reasonable price.

    Thanks

    Brian.
     
  2. steve lovatt

    steve lovatt Something else

    May 12, 2014
    9,228
    1,000
    North Yorkshire
    I bought some British Customs indicators for the Bonnie and they came with bullet type connectors. I could't find any Triumph type connectors either, so in the end I disconnected each original indicatorcut and cut the wire slightly back from the connector. I then fitted a female bullet to that end and plugged it back into the loom via the original connection. That way the new indicators can be fitted with the original connection in place. I have fitted male bullets to the old indicator wires so that I could put these back if the bike were ever sold (it won't be).
     
  3. Thunder 990

    Thunder 990 Member

    Dec 16, 2014
    12
    8
    Hi Steve, thanks for the info, that sounds like a good solution to the problem, if I can't find any connectors I will do the same.
     
Loading...

Share This Page