Spoke corrosion

My 02 America has stainless spokes and they are still in perfect condition, the tank was hand pin striped and initialled on the assembly line and the tank badges actually screw on. What I'm saying is that while these new Triumph models are all full of some of the latest in technology they seem to be losing the quality control that was found in the earlier Hinckley bikes. I realise that the whole industry is dollar driven and savings achieved by using tank decals instead of screw on tank badges saves the company money then that's the way things are. Going back to the original subject of spoke corrosion I agree with the other responses that to start seeing corrosion so soon in such a short period of time has got to be so disappointing as these bikes aren't cheap.

 

Yes there is a bit of £££££ v age I agree bikerman

 

The old adage 'you get what you pay for' comes to mind.



I expect to get a quality product for my £10k

Terry

 

I've got a 1977 Suzuki GT500 in my shed. 39 years old and I have no idea of it's history prior to me buying it a few years back. Chrome rims and zinc plating on the spokes - no sign of any corrosion.

My shed is concrete and is better insulated than my house and fitted with a frost heater, there are absolutely no dampness or condensation issues. After washing my bikes I thoroughly dry them and take them for a run. Given these factors, any form of rust on a bike less than 4 months old is wholly unacceptable.

 

Pasher strike whilst the irons hot.

If you drag your heels then the dealer will do the same.

I'd be contacting them every day until a satisfactory result was achieved

 

Well I got my T120 in May and my spokes are still in perfect condition from what I can see.

 

My bike goes back to dealer tomorrow. Like you, I hope that if the wheel is replaced it doesn't just go the same way. I just can't be bothered with hassle.

 

Good news pasher, at least they have recognised there is a problem and are prepared to sort you out, which is probably the least they can do, still not acceptable in this day and age of technology and materials available. Good luck when it is all sorted out.

 

Yep at least they've responded well.

Just a thought - The black wheels you can purchase in Triumph's accessory list are supposed to have stainless spokes. Couldn't you ask if your replacement wheels have stainless steel spokes as well?

 

but true........

 

Hmm, had one, before all that happened!

 

Well, wanna laugh?
The year was 2008...
Went to 'Eddys of Leeds' then triumph dealer only to find out they got rid of triumph to be replaced with HD un be known to me.
As we were there I was just walking back out of the door when a free coffee/hot chocolate/tea was offered to my wife................................................... Well, yes she accepted strangely enough whilst I ended looking around. Spotted a nightster1200 (single seat)and ended up test riding a 1200 sportster. The bike handled quite a lot better than I expected so put an order in for a new one as used ones weren't around, ordered a dual seat as remember they were single and they said it needs pegs as well so ordered those too and a sissy bar for good measure. First time out it hit the bump stops on every bump so set arse to hard and only slightly better. In the mean time it rode well without a passenger so I looked at upgrading the rear suspension. A short time after that on a bumpy country lane corner the front po-go sticked and hopped badly round a bend which un nerved me.
Took it to first service and explained the forks and they told me in not so many words it may need thicker oil and it's my problem, proper dick heads I thought, not impressed and whilst there I spotted the test bike which I took out and saw afterwards everything was majorly upgraded on it so you thought that was what you were getting. Sold it at 6 months old!

Strangely though I've now gone full circle and bought the bonneville I wanted at that time!!

 

Anyway Sussed it. Went to buy an other old bike from someone years ago who drag raced a sportster and he show me a 1340 in his garage and grinned slyly.......
It was an unbadged Kawasaki vn/vl thing with a Harley engine shoehorned in and what a proper job at a fraction of the cost!! £2500 all in! Now that's the way to do it.

 

Yep

 

Great that you got some satisfaction. My local dealer is getting back to Triumph after they rejected the warranty claim. Will give them a phone tomorrow.

 

I got it in late August.