Anyone with the 3pistons bar-end mirrors...

Discussion in 'Speed Triple' started by wilko1999, Sep 29, 2016.

  1. wilko1999

    wilko1999 New Member

    Sep 19, 2016
    8
    3
    Stroud
    I know there's a few on here with the above bar-end mirrors. I had a few questions about how they fit to the bike but haven't managed to get a reply from 3pistons themselves. Do they come with the bar fittings as the photos on the website don't show them? Also do they fit nice and tight like the original bar-end weights? I have some cheap chinese bar-end mirrors that fit with a nut and bolt that compressors a hard rubber bung and they don't really tighten up very well.
    Thanks in advance :)
     
  2. R_1000

    R_1000 Elite Member
    Subscriber

    Sep 2, 2016
    1,476
    700
    UK, London
    I have them. Yes they come with the fittings. However I couldn't remove the old ones inside the bar as the previous owner must have glued it in. Anyways after little improvising the fitting is good now. As for quality....I like it. Some don't because of the slightly bluish mirrors.
     
  3. wilko1999

    wilko1999 New Member

    Sep 19, 2016
    8
    3
    Stroud
    Thanks, yeah I saw them on your thread with pics. They look good, not too bothered about the bluish mirrors, I just want them to stay put! My cheap-ass chinese ones work but just don't seem to fit well. I think my S3 just deserves better!
     
    • Like Like x 1
  4. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,629
    1,000
    Southcoast of the UK Earth
    They fit just fine, if you have triumph bars with the nut inside you will have to remove them so as the new mirrors will fit. they use the wedge fitting and not that orible rubber shit :)
     
  5. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,629
    1,000
    Southcoast of the UK Earth
    Have them on mine. IMG_1209.JPG
     
    • Like Like x 1
  6. wilko1999

    wilko1999 New Member

    Sep 19, 2016
    8
    3
    Stroud
    Ah, brilliant, that's what I wanted to hear - the wedge fitting like the original Triumph bar-ends. Lovely bike darkman btw.
     
    • Like Like x 1
  7. R_1000

    R_1000 Elite Member
    Subscriber

    Sep 2, 2016
    1,476
    700
    UK, London
    That red handlebar looks super cool on white paint scheme :)
     
    • Like Like x 1
  8. RROB

    RROB Active Member

    Jul 9, 2016
    80
    28
    Worcestershire
    Got to be honest..... did buy a set of the three pistons ones and as well made as they were.. size wise (I was hoping larger) and smoked blue lenses (I was hoping clear but their ebay ad didn't say) they were no different to the ones (I'm assuming Chinese) that came already with the bike... and at four times the price more... returned them
    will say though as its not a dig they are well made and packaged well with all accessories that you need.
    I shall hang fire for some genuine ones (I assuming a little larger).
     
  9. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,629
    1,000
    Southcoast of the UK Earth
    Don't forget you get £20.00 off if you go on the TTRUK facebook page
     
    • Like Like x 2
  10. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,629
    1,000
    Southcoast of the UK Earth
    The Triumph ones do look bigger
     
  11. Clarkey231

    Clarkey231 Noble Member

    Jun 9, 2016
    473
    313
    Exeter
    I bought genuine and they seem to be smaller than the ones that come supplied on the new 16' bike.
     
  12. Clarkey231

    Clarkey231 Noble Member

    Jun 9, 2016
    473
    313
    Exeter
    I will pop some pics up in a bit.
     
  13. R_1000

    R_1000 Elite Member
    Subscriber

    Sep 2, 2016
    1,476
    700
    UK, London
    Check these out prob.....EBay item no

    201603969769
     
    • Like Like x 1
  14. RROB

    RROB Active Member

    Jul 9, 2016
    80
    28
    Worcestershire
    • Like Like x 1
  15. Clarkey231

    Clarkey231 Noble Member

    Jun 9, 2016
    473
    313
    Exeter
    Couple of pics

    image.jpeg

    image.jpeg
     
  16. Clarkey231

    Clarkey231 Noble Member

    Jun 9, 2016
    473
    313
    Exeter
    Couple more.

    image.jpeg

    image.jpeg
     
    • Like Like x 2
  17. R_1000

    R_1000 Elite Member
    Subscriber

    Sep 2, 2016
    1,476
    700
    UK, London
    • Like Like x 2
  18. RROB

    RROB Active Member

    Jul 9, 2016
    80
    28
    Worcestershire
    its sounds a bit anal..... any chance you could let me know approx dimensions of the mirror (lense) width and height just to see how they compare with my copies ?
     
    • Like Like x 1
  19. Clarkey231

    Clarkey231 Noble Member

    Jun 9, 2016
    473
    313
    Exeter
    No worries. I'll have to ask the Mrs as I'm away at work.
     
    • Like Like x 1
  20. muzhik

    muzhik Member

    May 9, 2016
    57
    18
    Maryland, USA
    image.jpeg image.jpeg
     
    • Like Like x 3
Loading...

Share This Page