Getting a rise

Discussion in 'Speed Triple' started by Waynedarcie, Sep 25, 2016.

  1. Waynedarcie

    Waynedarcie Active Member

    Aug 31, 2016
    34
    28
    Southport
    How difficult are handle bar risers to fit and can you recommend any .got a 12plate 1050 .
    Ta in advance
     
  2. Waynedarcie

    Waynedarcie Active Member

    Aug 31, 2016
    34
    28
    Southport
    Ha ha its up in the air for discussion if yer like
     
  3. Victor

    Victor Active Member

    Jul 26, 2015
    106
    43
    North Wales
  4. Waynedarcie

    Waynedarcie Active Member

    Aug 31, 2016
    34
    28
    Southport
    That looks pretty easy .even for me.
     
  5. Waynedarcie

    Waynedarcie Active Member

    Aug 31, 2016
    34
    28
    Southport
    Out of stock! Ill keep looking
     
  6. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,633
    1,000
    Southcoast of the UK Earth
    What about higher bars :)
     
  7. Waynedarcie

    Waynedarcie Active Member

    Aug 31, 2016
    34
    28
    Southport
    Higher bars would be a good idea .its just getting the rite ones .could do with getting some and trying them up against the bike .
     
  8. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,633
    1,000
    Southcoast of the UK Earth
    Do you have a local store where you could pop along on your bike and place them next to yours as a guide, to give you an idea the 50mm rise Rizoma bars i have can give me upto an extra 1" in height or pull back depending what angle i set them at over the standard bar :)
     
  9. Waynedarcie

    Waynedarcie Active Member

    Aug 31, 2016
    34
    28
    Southport
    They sound perfect .did you have to alter any of the cabling etc
    Ps
    Can you send me a link ta
     
  10. Wasp

    Wasp Well-Known Member

    May 14, 2016
    318
    63
    Burnley NWUK
    I think it's worth mentioning that once the bars have been raised, all may look well at first glance.

    Be worth getting the front end up in the air (suspended from above or lifted from the headstock area) to check FULL unrestricted/unfouled movement of the steering from left to right.

    Speaking from experience ya see. ;):confused:

    ATB

    Bob
     
    • Like Like x 1
  11. desertspeedy

    desertspeedy Senior Member

    Jul 28, 2016
    436
    113
    N. Phoenix, AZ, USA
    Piece of cake on my 2016 S. I bought the SWMOTO 28mm dia. with 30mm rise in the silver color. They fit perfect and do not restrict the cables. Easy install and I got the correct torque setting which is 23 nm. I love the ergonomics and I no longer am sliding forward in the saddle as much.
     
    • Like Like x 1
  12. Waynedarcie

    Waynedarcie Active Member

    Aug 31, 2016
    34
    28
    Southport
    Happy days .have you got a part number mate ta
     
  13. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,633
    1,000
    Southcoast of the UK Earth

    Don't have a link as i got them from Morespeed Racing just up the road from me, they are the 50mm fat bar and they fitted my 16 ST3 with no probs, cables no issue on lock to lock. You do have to cut off the little pins on the plastic switch gear as the new bars have no holes for them.
     
    • Like Like x 1
  14. Victor

    Victor Active Member

    Jul 26, 2015
    106
    43
    North Wales
    • Like Like x 1
  15. desertspeedy

    desertspeedy Senior Member

    Jul 28, 2016
    436
    113
    N. Phoenix, AZ, USA
    • Like Like x 2
  16. snarly

    snarly Active Member

    Sep 8, 2013
    52
    28
    Essex
    SW Motech (buy direct) are fine as desertspeedy says-easy to fit in 15 mins and no cabling issues.just make sure you have medium thread lock to prevent comedy handle bars after a few miles. had mine 18months now and love em.
     
    • Like Like x 1
  17. Waynedarcie

    Waynedarcie Active Member

    Aug 31, 2016
    34
    28
    Southport
    #17 Waynedarcie, Sep 29, 2016
    Last edited: Sep 29, 2016
    Will these fit ?
    Ebay 261994385990
    Ta
    Spoke to the bloke and he asked if theyre fat bars ?
     
  18. snarly

    snarly Active Member

    Sep 8, 2013
    52
    28
    Essex
    if you have the bar size then yes. You need to check the bar width where the clamp is as its wider there and tapers down towards the ends. Looks like this eBay riser use your existing top clamp so if the width is good you should be fine. just make sure you get the thread lock!
     
    • Like Like x 1
Loading...

Share This Page