Hi folks, newbie here and have a question I’m hoping someone might be able to help me with currently rebuilding a crashed 2017 T120. The connector from the main wiring loom to the cluster is damaged (cable torn and spade connector broken). I’ve searched everywhere for the 7mm square spade connector and/or the block connector (including 3 x wires), but having no joy. Really trying to avoid having to buy a whole new main harness as everything else is perfect. Any ideas or suggestions? Even a cheap, damaged harness would do where I could splice the block connector in to current harness. any advice is much appreciated! G
Hi Greg, welcome to the forum. Here's a link to an automotive connector place, they have over 40,000 different connectors, so chances are the ones you're looking for are in there. https://nz.mouser.com/c/connectors/automotive-connectors/ I know it's a NZ company but there are plenty of others in different countries.
Hi folks. Thanks for the welcome and thanks for those that replied. Managed to find a spade connector that was ‘close enough’ with the sacrifice of the retaining clip. Managed to create a wire and spliced in to the existing loom. all seems to be working so, hopefully I’ve avoided the expense of a new loom pics for reference. It’s not professional, but it’ll do! Thanks again. G