Featured What you been doing with your TRIUMPH today??

Discussion in 'Triumph General Discussion' started by flapinflares, Mar 7, 2013.

  1. Pedro1340

    Pedro1340 Senior Member

    Jan 31, 2018
    603
    143
    .Glasgow
    Lol i agree with everything you and everyone has said,it's only my opinion that it doesn't do it for me (at this point).And i can't see it will change, especially as every triumph I've owned and ridden have had brilliant gearboxes.Plus I seem to recall that it wasn't too long ago that members were saying they had wrecked their gearboxes using quickshifters.
     
    • Like Like x 1
  2. Fartomany

    Fartomany New Member

    Jun 29, 2024
    18
    3
    CHCH NZ
    Pumped the front tyre up, was doing the monthly ole blokes ride over our hills, with a stop at a neat country pub, but it seemed a little heavy in the front and was a bit of a shit in tight bends ... apparently one is recommended to run more than 13lb in the front ?
    Haven't had this happen before, and being in a hurry, just gave the tyres a quick thumb push, which will not happen again !!!!!!!
     
    • Funny Funny x 2
    • Like Like x 1
    • Face Palm Face Palm x 1
  3. Iceman

    Iceman Crème de la Crème

    Apr 19, 2020
    2,357
    1,000
    Lancashire
    A bit more work on the bike, Cerakoted header pipes and link pipe fitted, I chose to fit the Scorpion Ceramic Black end can, as I thought it looked better than the stainless steel one I have, the Yoshimura does sound great but having had the Scorpion link pipe Cerakoted I went with this set up. Sump pan coated and back on, along with other bits and pieces, fresh coolant and she fired up straight away, radiator repair holding up great, she sounds good as well. All there is left to do is re fit the side panels, indicators, belly pan and front mudguard. I have removed everything apart from the engine out, stripped and re greased all levers, footrests, quickshifter linkage, etc etc.

    thumbnail_IMG_20241122_150837.jpg

    thumbnail_IMG_20241122_150905.jpg

    thumbnail_IMG_20241122_150930.jpg

    thumbnail_IMG_20241122_151039.jpg

    IMG_20241122_150853.jpg

    IMG_20241122_150924.jpg
     
    • Like Like x 9
  4. Sandi T

    Sandi T It's ride o'clock somewhere!
    Subscriber

    Dec 3, 2018
    22,423
    1,000
    Tucson Arizona
    @Iceman, I wish you were my neighbor! ;):joy:
     
    • Funny Funny x 2
    • Thanks Thanks x 1
  5. Fartomany

    Fartomany New Member

    Jun 29, 2024
    18
    3
    CHCH NZ
    Off to a bike show about 50 miles south shortly ....for a small town, these guys run a great show and their own bikes are outstanding.
    Son has done the award trophies for 'Best Bike', etc, in timber around 500mm square on his copying machine, he scans pictures into the computer, fiddles about with size, depth of cut, this and that, pushes the go button and wanders off ! Sounds simple .... haha ?
    Once the picture is engraved he gently burns it, enough to blacken and then sands over leaving the picture and writing highlighted (or low lighted) ? Very effective !
    A good hobby since he broke both legs in an accident at the final speedway meet last season ... though as they were just over the line he was still awarded "3rd New Zealand Sidecar Speedway Championship" :joy::joy::rolleyes: !

    And today we have to race back as he is now Sidecar Rep ... and this year's championship is being held here tonight !!!
    And, to add to his woes, he went to take the 1200 Bonnie for it's first ride since ... and discovered he can't change gear as his leg hasn't healed straight, poor bugger ?

    Ah well, good luck and good weather to all . :grinning:
     
    • Like Like x 3
Loading...

Share This Page