2012 Speed R - Chain And Sprockets

Discussion in 'Speed Triple' started by cwspeedy101, Aug 19, 2023.

  1. cwspeedy101

    cwspeedy101 Member

    Jul 31, 2021
    29
    18
    Leicestershire
    #1 cwspeedy101, Aug 19, 2023
    Last edited: Aug 19, 2023
    Guys

    Looking for some guidance/advice on replacing the chain and sprockets on my 12' speed R.

    From my local mechanic I have been quoted roughly £200 fitted for stock (not OE) size sprockets (18/43 I believe) and a Tsubaki gold chain (don't know the p/n).

    Would you consider this a reasonable price?

    And.... what other options have I got? Have been reading lots about -1 tooth on the front and/or +2 (or more) on the rear to give more acceleration, and I guess easier to wheelie! However, I'm not a front end up kind of rider, and so leaning more towards stock teeth, although saying that, I do quite like the idea of quicker acceleration!

    What is the chain length - 525/530?

    Having browsed the web, it seems like a bit of a minefield, and I don't want to buy the wrong thing!

    Bike is on 30k and I think original chain and sprockets, so it's definitely time to replace.

    Also, is it best to replace the chain guides too?
    Number 20 & 27? in this diagram:

    upload_2023-8-19_15-13-4.png

    Thanks in advance for those who give me the knowledge

    The bike:

    IMG_1693[1].jpg

    upload_2023-8-19_15-16-51.png
     
  2. Dawsy

    Dawsy Cumbrian half-wit
    Subscriber

    Aug 24, 2018
    5,206
    800
    Cumbria
    Doesn't seem too bad a price to me. Can you not do it yourself? So long as you have a chain rivetting tool there is not much too it. As for the guides, I wouldn't think they need replacing unless they are worn.
     
    • Agree Agree x 1
  3. cwspeedy101

    cwspeedy101 Member

    Jul 31, 2021
    29
    18
    Leicestershire
    Hey Dawsy

    I am pretty confident I could do it myself yes, however I do not have the riveting tool, and I believe they are quite expensive to buy? Don't know anyone who has one I can borrow either.

    I would rather pay the £60 and know it's been done right tbh :cool:
     
    • Like Like x 1
  4. Dawsy

    Dawsy Cumbrian half-wit
    Subscriber

    Aug 24, 2018
    5,206
    800
    Cumbria
    Fair enough. I used to have the gear but it vanished somewhere in the last 30 years:grinning:
     
    • Like Like x 1
  5. speeder

    speeder Noble Member

    Jan 3, 2019
    408
    313
    dorset
    It's easy enough to do yourself, useful to have an impact gun as well for the gearbox sprocket nut (loosen it before removing old chain)
    Should be 530 chain for speed triple.
     
    • Thanks Thanks x 1
  6. Marco Wikstrom

    Sep 28, 2023
    87
    18
    Albuquerque, New Mexico
    I have the same bike - curious to see what sprocket sizes people are using.
     
  7. cwspeedy101

    cwspeedy101 Member

    Jul 31, 2021
    29
    18
    Leicestershire
    Just to update, the task has now been completed thanks to a friend of a friend who had the chain splitter/riveter

    I went for stock sized front (18T) and +2 on the rear (45T) and it's absolutely bang on! More low down power/acceleration but not so uncontrollable that it wants to wheelie at the slightest pull of the throttle :yum

    JT sprockets and DID chain

    IMG_0208[2].jpg

    NB the chain tension was reduced post photo :blush:
     
    • Like Like x 4
  8. Boothman

    Boothman Senior Member

    Jul 26, 2023
    618
    243
    Wigan
    Assume you have already got a Speedo Healer
     
  9. cwspeedy101

    cwspeedy101 Member

    Jul 31, 2021
    29
    18
    Leicestershire
    Nope! Based on my GPS speed, the clocks are pretty close tbf :cool:
     
    • Useful Useful x 1
  10. thebigg

    thebigg New Member

    Apr 21, 2018
    0
    1
    Brisbane, Australia
    Speedo healer should not be needed as the speed is derived from the rear ABS sensor afaik
     
    • Thanks Thanks x 1
    • Useful Useful x 1
Loading...

Share This Page