Metal / Cnc Brake Reserviors Upgraded!

Discussion in 'Speed Triple' started by Alom, Sep 26, 2022.

  1. Alom

    Alom Member

    Apr 2, 2022
    30
    18
    New Zealand
    #1 Alom, Sep 26, 2022
    I don't like the front/rear plastic brake reservoirs. Tried to search online for upgrading them to CNC. But I was told the front one was EOL. Finally ordered a set of CNC reservoirs even a sales told me the front reservoir wouldn't fit my bike.

    Wait for couple of weeks, received new reservoirs. easy to install and finish bleeding. but I forgot to bleed the ABS. not sure if it's ok. just worry about if the ABS stops working. no idea how to check if they work well. anyway, will order software to bleed them.

    1.jpg 2.jpg 3.jpg 4.jpg 5.jpg 6.jpg
     
    • Like Like x 4
  2. Gitter

    Gitter Member

    Jan 12, 2021
    47
    18
    Napa, California
    #2 Gitter, Oct 1, 2022
    Looks good. As far as bleeding the ABS, do the brakes feel any different? I don't think you should have to bleed it just for swapping out the reservoirs.

    Every time I've done it, I just had to bleed the rubber hose between the master cylinder and the reservoirs. Unless you squeezed the brake lever (or pedal down) before you bled the rubber hose, you should be good.
     
    • Agree Agree x 1
  3. Alom

    Alom Member

    Apr 2, 2022
    30
    18
    New Zealand
    #3 Alom, Oct 2, 2022
    thank you for the post.

    just back from the dealer workshop. I was told everything is ok after they did road testing. anyway, I will test active the front and rear abs when the weather gets better.
     
  4. komp

    komp Member

    Sep 10, 2019
    44
    18
    essex
    #4 komp, Oct 7, 2022
    i also looked into replacing, but like you found to be discontinued?
    so did you just find some available or did you order model for a different bike?
     
  5. Ducatitotriumph

    Ducatitotriumph Crème de la Crème

    Apr 25, 2019
    2,181
    1,000
    Rothwell
    #5 Ducatitotriumph, Oct 7, 2022
  6. Alom

    Alom Member

    Apr 2, 2022
    30
    18
    New Zealand
    #6 Alom, Oct 8, 2022
    yes. it's what I installed on my bike. it's for 1200rs but definitely compatible with my 1050.
     
    • Useful Useful x 1
Loading...
Similar Threads - Metal Cnc Brake
  1. Alom

    About Metal / Cnc Brake Reserviors

    Alom, Apr 30, 2022, in forum: Speed Triple
    Replies:
    16
    Views:
    2,221
    Alom
    May 9, 2022
  2. DJ_DC

    2017 Bonnie T120 - Rails, Racks, And Mixed Metals

    DJ_DC, Dec 15, 2024, in forum: Bonneville
    Replies:
    8
    Views:
    526
    pcwolf
    Dec 18, 2024 at 2:32 PM
  3. PhannieNL

    Sold: Beeline Moto Gunmetal Grey Triump Edition

    PhannieNL, Sep 28, 2024, in forum: Parts, Accessories & Clothing
    Replies:
    2
    Views:
    330
    PhannieNL
    Oct 7, 2024
  4. Yousef

    Rear Lock Bent Metal Plate. Is This An Issue? Thank You

    Yousef, Aug 4, 2024, in forum: Technical Help
    Replies:
    1
    Views:
    96
    Yousef
    Aug 4, 2024
  5. PieMan

    Triumph Metal Tank Badges - Garden Gate, Eyebrow, Cast.

    PieMan, Jan 27, 2023, in forum: Parts, Accessories & Clothing
    Replies:
    2
    Views:
    2,315
    BLKWND
    Mar 8, 2023

Share This Page

Sign up