Bike Sat For 3 Years

It will need a full service including new filters and oil, coolant and brake fluid. Tyres could well be past their sell by date even if they still have plenty of tread. Almost certainly a new battery as well. And definitely new fuel.

 

It's iunlilely your batter will have survived. You could try charging it but I expect it won't take. If there's not much fuel in it you could try topping it up and see if it runs. Full service, as mentioned. Tyres may well need changing, especially if they've been standing on the same part for a long time and had low pressure. A good clean would be a place to start. If you can, use snowfoam to help loosen the dirt then wash off before cleaning with lots of water and a decent shampoo. That'll also help you look over the bike in detail and see if anything else needs sorting. Don't forget to lube the chain before you go anywhere.

 

A good bunch of things to be going on with. Why not post some photos of the bike…

 

I'd certainly go with a good wash first but I'm not a fan of power washing (jetwashing?) bikes so it'd be a hose pipe and buckets of soapy water for me. Then it's just a case of working through the items mentioned above. Being stood for so long, the engine top end could be quite dry so I'd change the oil and filter cold, then spin the engine over on the starter, with the plugs out and fuel pump disabled, to get oil round the engine, then go for a full start. At 1000K it's barely run in so well worth saving!

 

Nikos1965
For the fuel just get a syphon and drain the tank fill with new fuel. Use the five