Swing Arm Spool Thread Size

No responses yet? Wish I had the correct answer for you. Is there an easy way to get a thread gauge on it?

 

Perhaps one of the local Triumph dealership might be able to tell you the thread pitch. Or you could go buy a few metric bolts at Lowe’s and see if one of them threads in by hand. If it doesn’t go in by hand threading it’s not the correct pitch. Clean the inside a bit first so there’s no debris in the thread. Got a picture of where the bolt needs to go?

 

M6 from memory, any good motor factor shop should have a suitable allen key fastner in stock, although you may have to cut one to a suitable length, if you choose stainless bolts then use a very small amount of anti seize compound, due to the stainless steel and alloy that would otherwise cause the 2 metals to fuse together (a chemical reaction), the copperslip prevents this taking place, the trick is a minuscule amount. Hope this helps and ride safe all.