2010 T100 No Start

Discussion in 'Technical Help' started by Jalapeenoz, Oct 19, 2021.

  1. Jalapeenoz

    Jalapeenoz New Member

    Jul 22, 2020
    23
    3
    Illinois, US
    Hi all,

    I have a 2010 Bonnie T100. I've been riding it all summer, including yesterday, with no issues. This morning I went to get on it and it wouldn't start. The headlight and indicators all came on, the fuel pump cycled on for a couple of seconds as normal, but when I pushed the starter button I just got a click and nothing else. Would that be a battery issue if everything turned on? I'm not a wrench by any means, especially on bikes, so other than the battery or a fuse I'm not sure where to start looking. Any ideas would be most helpful.
     
    • Agree Agree x 1
  2. Jalapeenoz

    Jalapeenoz New Member

    Jul 22, 2020
    23
    3
    Illinois, US
    Forgot to mention that the engine light is on when I try to start it and it just clicks
     
    • Agree Agree x 1
  3. sprintdave

    sprintdave Nurse,he's out of bed again

    May 25, 2014
    1,532
    750
    Birmingham
    Check connections to battery are clean and tight.
    Try doing a jump start from a known good battery ie car battery

    Batteries can just fail with no warning. It may have enough power for the lights and pump but not sufficient to use the starter.
     
    • Agree Agree x 1
  4. Jalapeenoz

    Jalapeenoz New Member

    Jul 22, 2020
    23
    3
    Illinois, US
    Thanks. I will check that out later after I get home from work.
     
    • Agree Agree x 1
  5. Jalapeenoz

    Jalapeenoz New Member

    Jul 22, 2020
    23
    3
    Illinois, US
    Update, I put a charger on the battery for about 10 minutes and the bike fired right up. It appears the battery was the problem.
     
    • Like Like x 2
  6. joe mc donald

    Subscriber

    Dec 26, 2014
    14,310
    1,000
    slough / burnham
    Jalapeenoz.
    Great result.
    Joe
     
Loading...

Share This Page