Torque Settings For Triumph Twins

Excellent that !

 

Nice one Crispey

 

Very useful - Thanks Crispey.

 

Thanks a lot for this!!!!
Great to have it all there so nice and neat!!!

 

Spot on

 

Hello ! Total mechanic noob again here. Can someone explain to me what that is ?

 

Is a torque Wrench a wrench which applies a specific pressure to a bolt ?

 

Thank you for this very precise answer.

 

To cover most ranges you will need at least 2. A 1/4 and 3/8 inch drives.
1/4 inch usually up to 25 nm and the 3/8 inch up 120 nm.
I actually have 3, I also have a 1/2 drive which goes up to 210 nm.
I use these for tightening up on the bike as its too easy to strip a thread on an aluminium engine.
To undo a nut/bolti would suggest using a breaker bar rather than the socket handle as well

 

Allright, so say I would like to change my suspension, I would need those right ?
(It's all theory, as a complete catechumen in mechanics and motorcycles I probably won't do it this year )

Thank you for your answers. It's much appreciated.

 

Depends what you mean by change your suspension.
If you mean adjust preload etc then no.
If you mean put a different brand of suspension on then yes.
Do you intend to do your own maintance or are you going to get a garage to do it?
Decent quality tools are expensive so if you weren't going to get the use out of them, it would be hard to justify you spending a great deal of money on them.
Do you already have tools or are you just starting out to buy them?

 

I'll tell you exactly what I want.
I want to learn.
I'm a graphic Designer and photographer. Never did anything remotely close to mechanics. I just bought a Bonneville, and I'd like to be able, say in about 2-3 years to somewhat be able to maintain it by myself, be able to change my parts, do my servicing etc... So when I see an opportunity to learn about anything of such, I try to learn

I completely understand the stupidity of buying expensive tools for nothing. Most of my tutees want to buy a 1200£ camera, when then just started photography... Useless...

So, no, I have no tools, my precious is parked on a private driveway until further notice, so no shed or garage, I have no mechanics knowledge. I just read forums and try to learn stuff. ( and, as a French, technical terms often need to be explained to me as it is not my mother tongue )/.

 

Not a prob Sam. So at some point you intent to do your own servicing, that's good imv.
So you need a starter set of decent tools.
If it was me starting out I would buy something like this. Not too expensive but Sealey are a good make.
http://www.ebay.co.uk/itm/301141736474?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
The advantage is you have proper storage and the tools needed to cover most jobs that you will be able to do. Not just for the bike either as some of them you would be able to use for general DIY as well.
Overtime you would add to them with specific tools that you need in addition to those ones.
Your problem is partly having somewhere to work on your bike and store your tools.
Another option would be the likes of this
http://www.halfords.com/workshop-to...onal-200-piece-socket-and-ratchet-spanner-set
I have built up my tools over the years, I started off with a very basic socket set and in time have replaced it, that's not including the various other tools over time I have bought such as the torque wrenches , breaker bars, impact hammer , impact sockets etc. The list goes on believe me
I still buy tools now. One thing I don't have is a good storage system for them.

 

Cheers Crispy, very useful

 

Just purchased via Ebay a Draper Torque Wrench (Model 3004A) 3/8 with a 1/2 converter - just the job! Completed rear brake maintenance after viewing Delboys video - no problem.