Engine Management Light On After Datatool Removal

Discussion in 'Technical Help' started by William Bonni, May 9, 2021.

  1. William Bonni

    William Bonni New Member

    May 2, 2019
    11
    3
    North Derbyshire
    Can anyone offer any idea's please? The Datatool failed on my 2012 Bonneville, so off I went to Triumph and purchased the shorting link @ £15.00, off home and fitted the link which is very easy but on firing up the bike I find that the engine management light is on permanently!!!! Has anyone experienced this or have the solution to it please?
     
  2. sprintdave

    sprintdave Nurse,he's out of bed again

    May 25, 2014
    1,532
    750
    Birmingham
    Have you tried 3 cycles of running up to temp and cooling down again, ie a run out then leave till cold x 3 You don't have to do it the same day
     
    • Agree Agree x 3
  3. William Bonni

    William Bonni New Member

    May 2, 2019
    11
    3
    North Derbyshire
    Yes, tried that but it didn't work thanks, however I bought a code reader and cancelled the error code and that appears to have worked.
     
    • Useful Useful x 1
Loading...

Share This Page