Thruxton Best (uk Available) Track Stand For Thruxton 1200

I couldn’t find anything uk local so I made a ramp from several differing lengths of timber screwed on top of each other to suit my stand so when the bike is wheeled onto it and the wheel is raised enough so the stand can be pushed down easily as the bike only needs to be raised and lowered about an inch.
However several bits of timber screwed together to fit under the side stand are also required to set the bike almost vertical before the bobbins are engaged by the stand. I also used a Velcro strap to hold the front brake lever on. Sounds complicated but very safe and extremely easy to put the bike on the stand instead of precariously attempting to lift the bike some 4-5” without the wooden aids. The ramp has a removable Bump stop is which stops the bike rolling of the end and allows the wheel to be slipped out or the remainder of the ramp to be slid forward out of the way.

 

I was using one which looked identical to this
https://www.ebay.co.uk/itm/RYDE-ALU...-/353073958738?_trksid=p2349624.m46890.l49286

Mine was a cheap no name ebay one, I think this this is the same one and it gives a size to the hook so you can check against your bike. I found it low enough to lift the thruxton without too much effort.

 

Hey Cooky. I have a paddock stand that looks identical to that so if you want to try it before you buy one, you'd be welcome. Whereabouts in Devon are you?

 

OK - well,I hope it does work. Longer term you might want to think about an Abba superbike stand - not cheap but very good and with an additional attachment it can enable lifting of the front wheel.

The 1Jac stand will do it all and is a fantastic piece of kit - extremely well made, in this country, with great after sales support - but it is on the pricey side!

 

Gee Tech stands all day long

https://jamesnuttphotography.wordpress.com/2017/02/14/gee-tech-paddock-stands/