Ill Fitting Knob.

Discussion in 'Technical Help' started by DanielB, Mar 11, 2021.

  1. DanielB

    DanielB Noble Member

    Jan 13, 2019
    881
    393
    Abingdon, Oxfordshire
    #1 DanielB, Mar 11, 2021
    I am not one to normally complain about such things but I have an ill fitting knob. Maybe it is my age?

    I have tried hammering it, gently teasing it...but it just won't seem to fit like it should...

    The conical knob that fits in the rear axle on my 2002 Speed Triple 955 keeps falling out.

    Any suggestions?

    IMG_20210311_141912.jpg

    IMG_20210311_141859.jpg
     
    • Like Like x 1
  2. joe mc donald

    joe mc donald Joe
    Subscriber

    Dec 26, 2014
    14,485
    1,000
    slough / burnham
    #2 joe mc donald, Mar 11, 2021
    DanielB
    You probably need a new o ring there. And dab on some silicon.
    Joe.
     
  3. DanielB

    DanielB Noble Member

    Jan 13, 2019
    881
    393
    Abingdon, Oxfordshire
    #3 DanielB, Mar 11, 2021
    Thanks Joe, I looked on Triumphparts...but no joy for an oring. Any recommendations?
     
    • Like Like x 1
  4. joe mc donald

    joe mc donald Joe
    Subscriber

    Dec 26, 2014
    14,485
    1,000
    slough / burnham
    #4 joe mc donald, Mar 11, 2021
    DanielB
    Just get an oring kit suitable for oil and petrol. I have some in my garage. I am going to the HCafe Saturday and can bring them with me if you want to try.
    Joe.
     
    • Like Like x 3
  5. DanielB

    DanielB Noble Member

    Jan 13, 2019
    881
    393
    Abingdon, Oxfordshire
    #5 DanielB, Mar 12, 2021
    That is good of you to offer Joe, thank you. Will be nice to get out for a ride...what time might you be around the cafe?
     
    • Agree Agree x 1
  6. Cyborgbot

    Cyborgbot Guest

    #6 Cyborgbot, Mar 12, 2021
    It shrinks with age, the cold, and lack of use.

    Your knob must be really small...

    :):joy:;)


    (But not a small as mine)
     
    • Agree Agree x 2
    • Funny Funny x 1
  7. Iron

    Iron Guest

    #7 Iron, Mar 12, 2021
    I was gonna press the agree icon as well, until I thought about it.
     
    • Funny Funny x 2
    • Agree Agree x 1
  8. joe mc donald

    joe mc donald Joe
    Subscriber

    Dec 26, 2014
    14,485
    1,000
    slough / burnham
    #8 joe mc donald, Mar 12, 2021
    DanielB
    I was aiming for around mid day. I will be riding a black Honda cb500. I will go now and get my o'ring kit and hopefully there will be one to fit.
    Joe.
     
  9. DanielB

    DanielB Noble Member

    Jan 13, 2019
    881
    393
    Abingdon, Oxfordshire
    #9 DanielB, Mar 12, 2021
    Great, I'll try and be there. I'll be on a blue Triple, and a high vis airvest...probably with my leg stuck out as I'll have hip cramp.
     
    • Like Like x 1
  10. Iron

    Iron Guest

    #10 Iron, Mar 13, 2021
    So, did you go? Did you meet? Did you have a fitting o-ring? Blimey, it's exciting o_O
     
    • Like Like x 1
    • Funny Funny x 1
  11. DanielB

    DanielB Noble Member

    Jan 13, 2019
    881
    393
    Abingdon, Oxfordshire
    #11 DanielB, Mar 13, 2021
    Well, yes. We met. Rings were exposed and the best on the day selected and lubed and then some dedicated insertion attempted. We pushed, and we teased and we fettled...

    The fit seemed tight, but it may just be because we are both out of practice, but also it all seemed a little ill fitting.

    However we compromised with Joe carrying out one successful insertion, with his mate Keith also banging some wood. The fit seems snug and sound.

    I'll have a go myself tomorrow, with some extra rings given by Joe, as I would like to give it a good hammering, but in my own time.

    It was very good to meet a fellow forum member. Joe's a lovely chap, exceptionally helpful and brilliantly knowledgeable. Certainly no ordinary Joe!
     
    • Like Like x 4
    • Funny Funny x 1
    • Useful Useful x 1
  12. andyc1

    andyc1 Lunarville 7, Airlock 3

    Feb 4, 2017
    2,927
    1,000
    N. Ireland
    #12 andyc1, Mar 13, 2021
    Bikers are the best people :)
     
    • Like Like x 2
    • Agree Agree x 2
  13. joe mc donald

    joe mc donald Joe
    Subscriber

    Dec 26, 2014
    14,485
    1,000
    slough / burnham
    #13 joe mc donald, Mar 13, 2021
    Last edited: Mar 13, 2021
    Yes peeps we had a meet. And DanielB is one of the nicest gents I have had the pleasure of meeting. This is what makes this asylum so special. He really went out of his way to make thing's right and he has a rather nice speed 955. Real sweet machine. DanielB had to correct the bike title as i am showing my age.
    Joe.
     
    • Like Like x 3
    • Thanks Thanks x 1
  14. Iron

    Iron Guest

    #14 Iron, Mar 13, 2021
    A happy ending. :)
     
    • Like Like x 1
    • Funny Funny x 1
  15. joe mc donald

    joe mc donald Joe
    Subscriber

    Dec 26, 2014
    14,485
    1,000
    slough / burnham
    #15 joe mc donald, Mar 13, 2021
    Iron
    Yes it was a great day. And it got me back to enjoying my bikes again as it is the first big run i have did since my accident. And it felt really good.
    Joe.
     
    • Like Like x 2
  16. andyc1

    andyc1 Lunarville 7, Airlock 3

    Feb 4, 2017
    2,927
    1,000
    N. Ireland
    #16 andyc1, Mar 13, 2021
    Bikes in the blood Joe, not so easy to give up ;)
     
    • Like Like x 1
  17. joe mc donald

    joe mc donald Joe
    Subscriber

    Dec 26, 2014
    14,485
    1,000
    slough / burnham
    #17 joe mc donald, Mar 13, 2021
    Andyc1
    You are so right and i am infected well and truly.
    Joe.
     
Loading...
Similar Threads - Ill Fitting Knob
  1. Dennis Mcleroy

    Fitting A Newer T100 Tail Rack On My 2014 Bonneville

    Dennis Mcleroy, Mar 15, 2024, in forum: Bonneville
    Replies:
    0
    Views:
    504
    Dennis Mcleroy
    Mar 15, 2024
  2. AGP556

    Balancing Efi Throttle Bodies And Fitting A Temporary Tacho On A 2012 Bonneville

    AGP556, Feb 21, 2021, in forum: Technical Help
    Replies:
    6
    Views:
    2,094
    topbanana0
    Feb 25, 2021
  3. Notso

    Remove Bulb Cap When Fitting Headlight Grill

    Notso, May 20, 2020, in forum: Technical Help
    Replies:
    0
    Views:
    1,058
    Notso
    May 20, 2020
  4. Andy-K2

    A2 Bonneville Rev Counter Fitting

    Andy-K2, Oct 22, 2018, in forum: Technical Help
    Replies:
    0
    Views:
    844
    Andy-K2
    Oct 22, 2018
  5. DGBland

    Fitting A 19 Tooth Sprocket To My T100 Bonneville

    DGBland, Jun 26, 2018, in forum: Bonneville
    Replies:
    21
    Views:
    10,730
    steve lovatt
    Jul 8, 2018

Share This Page

Sign up