2001 955i Speed Triple - Clutch Plates

On the 1050 set, 2 of the plates are thicker than the others. These were for the inner and outer.
You also need to put the steel plates in the correct order. 2 different sizes 1,5 mm, and 2mm.
It's maybe the same on the 955?

 

So for my two pennies, does anyone know the correct order of the varying sized steel plates...I’ve bought a second-hand single-spring clutch for my T595 and, whilst everything came nicely ziplocked together, it would be a comfort to be able to check before fitting.

And, David, if it helps I’ve read that the plates you are referring to are different in that they are black between the ‘pads,’ rather than silver?

 

I don’t suppose you know the order of the steel plates, do you, Hubaxe? On the parts list it only lists one size...part no: T1170714...I’m a little confused?

 

Hi,
I know the order for the 1050. If you have the same number of plates 5 thin / 4 thick it's maybe the same?
Here it is:
From back to front:
1,6mm / 1,6mm / 2mm / 2mm / 2mm / 2mm / 1,6mm / 1,6mm / 1,6mm

Hope this helps

 

Many thanks, Hubaxe, great information! I’ve just checked out the parts list for the 1050 and that does actually list the two separate plates, whereas the 595/955 et al. only lists the one, which reassures and answers my question I think!
Have a great weekend,
Stuart