Loose Spokes

Discussion in 'Bonneville' started by browned off, Aug 28, 2020.

  1. browned off

    browned off Member

    Jun 22, 2017
    9
    8
    wirral
    Has anyone had problems with loose spokes on rear wheel of watercooled bonnies
     
  2. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,358
    800
    Nr Biggar
    The simple answer is ‘probably’ but it is not so much a ‘problem’ as a maintenance issue. See p88 of your owner’s manual. Pretty much a routine check item. Just nip them up slightly without affecting rim alignment.
     
    • Like Like x 2
    • Useful Useful x 1
  3. browned off

    browned off Member

    Jun 22, 2017
    9
    8
    wirral
    Took bike in for service,my man said could not tighten spokes as just kept turning.He rang his wheel man who said he has done loads of these and it is a common problem.
    my mechanic says they are just turning,he has spoken to his wheel buider who says he has had this alot with bonnies.
     
  4. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,358
    800
    Nr Biggar
    That sounds pretty lame. I know they are straight pull spokes but holding the spoke while tightening the nipple is hardly rocket engineering.
     
    • Like Like x 2
    • Agree Agree x 1
  5. Don the Don

    Don the Don Bigger Than The Average Bear

    Nov 5, 2019
    2,947
    800
    MORAY UK
    I wonder what an MOT tester would make of it when you present the bike with loose spokes
     
    • Agree Agree x 1
  6. Samsgrandad

    Samsgrandad Senior Member

    Dec 15, 2019
    577
    243
    Somerset
    Probably a fail if enough spokes loose, maybe if you're lucky an advisory
     
    • Like Like x 1
  7. Thripster

    Thripster Elite Member

    Feb 21, 2020
    1,061
    750
    Northampton, UK
    Did you spoke to them about it?
     
    • Funny Funny x 3
  8. Tigcraft

    Tigcraft Unheard of Member

    Mar 29, 2014
    2,617
    800
    Holmfirth West Yorkshire
    I’ve just re-spoked one of my bikes and it’s easy as hell. Apply common sense and clamp the spoke where it’s not seen as much then lube Nipple with wd40 and just tighten to the right ‘sound’
     
    • Like Like x 3
Loading...

Share This Page