Featured About My New Street Scrambler

After spending over £9k on a new SS I would be seriously pissed off if I needed spend yet more money to get decent, rear shocks, fork internals, inner tubes, fuel boost plug, throttle mod etc. Do these deficiencies not show up on a decent test ride? I’m sure Triumph are well aware their products are not quality items but will do nothing to change them as long a people keep on buying their sub standard bikes. Shame on Triumph.

PS. Let’s not start again with the “comfort” seat scam!

 

Guess it’s what you expect out of a bike and how and where you want to ride it... I’ve had the 1st generation SS and traded up to the newer one purely because of the improved front brakes and higher bhp giving a noticeably better power range. My only issue was with the front inner tube on both bikes which my dealership sorted without hassle on both bikes... I’ve done about 4K miles combined with both bikes and have never thought I needed to change any of the set up from stock so am one happy customer... still enjoy the bike immensely every time I go out and can’t think what I would want to swap it for even if thinking of a change... I don’t go charging about off road so can’t comment on the bike in those conditions but guess the clue for where it’s intended use is in its name .. street scrambler ... of course once you’ve paid your money it’s your bike to change whatever you want to suit your individual taste and that’s absolutely fine and keeps the aftermarket economy in business..

 

I think a lot depends on an individual rider's expectations of a machine. The SS rides pretty much as I expected it to given it's component spec, certainly not perfect but few bikes are. I also got over £1200 of the list price which was a bonus. Back in 2011 I blew £16k+ on a 1198SP but fell out with it quickly and sold 3 months later despite having a test ride. I part-exed an '04 R1 I'd had from new to get it and never regretted selling a bike as much, before or since.

 

Good to hear you got £1200 off the list price. Did they give you a reason for this? Older model? Just not selling?

 

The tank is quite small on the SS so range will never be in the tourer/adventure bike class. Ive found MPG can vary quite a bit depending on how "enthusiastic" you are on your ride.
I've also bought a bike dryer recently and it makes washing &drying the thing far easier.
I'm sure I've read on here somewhere that the ECU reset procedure is simply letting the bike idle for 20 minutes or so.

 

So if £9000+ only gets you budget (poor quality, not really up to the job) components how much more do you have to spend to get decent kit!? I’ve heard similar woes on the higher cost Speed Twin which you alluded to. There is just no excuse for Triumph fitting such piss poor items. May be to appease the bean counters but does anyone know the price of a pair OEM shocks to buy compared to Hagon or other after market suppliers? A lot more I bet. So why fit naff ones in the first place? As has been said before, it’s all down to personal taste and some folks find them adequate, but seemingly a lot don’t.
You say the test ride high lighted the problem yet you still bought. So may be Triumph are right all along, “we can make em sub standard but they’ll still sell” Did you return to the dealers and tell them the shocks weren’t good enough and you’d be replacing them? Not that they’d be bothered in the slightest, “just sign here sir”.
Can’t ever imagine this happening in the car industry.
“ That Golf is lovely, but I’ll be changing the suspension, front and rear when I get it home”.
Triumph (Hinckley) built its reputation on good quality, decent priced bikes. Now we seem to have to many similar models of average (or below) quality at higher end prices. Tis a slippery slope Triumph is on and it looks like it’s gonna get a whole lot steeper!

 

The whole idea of wether or not something is worth the price or "not up to the job" is subjective. I've owned and ridden enough bikes over the years to know that most (excluding race machines) are a compromise. Those wearing an off road/on road badge, like the SS, even more so. I already own a full on dirt bike (crap on the road) and a fast road bike so for me personally, the SS as a whole, looks, ride, practicality, performance, is what I wanted and expected. OK, maybe the 1200 engine in there would be nice and stick a cherry on the performance (not interested in a 1200XC/XE) but overall I'm happy with it. As far as the price goes I was looking into a purchase at list price but fell very lucky in getting a bike that was prepped and PDI'd ready for pre-registration and sale just before the Covid lockdown hit which meant it couldn't be registered so it sat in the showroom until they reopened in June and could register the bike on a new 20 plate which they then sold at the pre-reg price they had originally planned. With hindsight I'd still have bought it at full sticker price, the discount was just a big bonus.

 

Hello JD. hope you are still enjoying the Scrambler. I find them very easy motorbikes and fun.
Improvements from standard are the same on all makes of cars and bikes. All manufacturers offer extra options.
I have covered 1900 mile and enjoyed everyone of them. Today I have fitted the Fox rear shocks. Decided to smooth out a few bumps and potholes. Will let you know how it goes after a few ride outs.

 

Day 1 with Fox Shocks.
Out on the Scrambler today to try out the settings on the Fox Shocks. The original shocks are not that bad, but they do lift you off the seat on a bump or combinations of bumps. They Fox Shocks keep you in the seat and the wheel on the ground. A much improved ride on the Street Scrambler.

 

Having now rode the Scrambler with the new Fox Shocks for quite a few rides. I am impressed with the improvement and handling. My bike is a Street Scrambler 2019. The bike is much more stable in corners and overall comfort is greatly improved. The big surprise is that the front forks are a much better balance and work well with the rear Fox Shocks. They both work as a team.
I now have no reason to look at putting Progressive fork springs in.

 

I added the Fox Shocks that greatly improved the ride and handling. Already had the Triumph Clear screen. Still had a bit of wind buffering when riding at 60-80mph.
After visiting my Triumph dealer I had a look at the new Tiger 900 Rally. The Hand guards are perfect shape for the Street Scrambler 900. Not too bulky or heavy and fit on the bar end and the mirror mounting point.
I have now taken the Triumph for a ride today and the temperature is falling. Normally have cold fingers unless wearing winter gloves. This time, No cold fingers and wearing summer gloves ! and the bonus was that the wind buffering I experience between 60-80mph, now I have added the Hand Guards this has gone. They work really well with the Triumph short touring screen.

 

Those look really good - I'll have to investigate!

I've done a quick investigate - do you have part number(s) and prices as the configurator isn't showing them and the places with the online parts don't list the Tiger 900 as yet?

 

I had to order them by part numbers from the Tiger 900 Rally (Not the PRO). The cost with the VAT for all the parts is about £105.00

 

GYP. just went out to the recycling bin and pulled out the Triumph plastic bags to get the part numbers.... lol .
Handguard RH = T2316000
Handguard RH bracket = No sticker on the plastic bag
Handguard LH = T2315000
Handguard LH bracket = T2318000
Nut,captive M5, Need 2 = T3350129
Screw,but/HD.M5 , Need 2

Basically you need for each side a LH and RH set. Each set needs the Handguard, Bracket back to mirror, a bar end round disc and a screw to go through it, then at the mirror bracket you need the small clip with the thread in it to push over the plastic flange on the inside of the handguard. Then last you need the screw that goes through the bracket and bolts the guard into one section.
I went into the Triumph dealer and asked them to get the drawing onto the screen and ordered the parts as it is not in a kit.
You need to slightly modify the Right hand one so to accommodate the front brake cup in the original place (see pictures).
Any questions just ask.

 

Thank you so much for that.

I'm amazed that the guards aren't offered as a kit for the base model as that one comes without them - mind you with Triumph's pricing the kit would likely be £210.

RH bracket is T2319000.

Found this https://www.bike-parts-triumph.com/...er-900-rally/HANDGUARDS/123/10011531027/0/123 by doing a part number search

 

All the parts came to £105 with vat