Scrambler Ohhhh O My Legs On Fire

Yes BUT to do so you need to cut where two pipes meet and separate then remove all the pipes and wadding inside then re-weld. I’ve not done it but a few people on Facebook have. I was hoping you could just remove baffle but cant apparently take a look on the Facebook group. https://www.facebook.com/groups/1434217350055102/?ref=share

 

Let me paraphrase then looks like something you could do if you had a grinder and welding skills and once you open up the fat end at the join to the straight pipes a whole load of baffle material and pipes inside which I then have to grind out leaving just the hollow pipes some people have done this in conjunction with a decat but I hear it causes some back pressure issues don’t even know what that is. If its weight loss and sound your after check out the SP Engineering pipes, again too loud with decat

 

Done three things to reduce the heat fitted a D cat pipe then wrapped the exhaust behind the shields and finally put some heat reflective material on the inside of the rear most heat shield all in all way more bearable now