U.k. Bonneville

Discussion in 'Bonneville' started by Tom Gillam, Jul 19, 2019.

  1. Tom Gillam

    Tom Gillam Guest

    Ok,thanks for that Callum and happy Hogmanay.
     
  2. Tom Gillam

    Tom Gillam Guest

    Can anyone point me in the right direction?
    Electrical: bike starts lights go on,checked all the fuses,ok,BUT no horn,indicators or brake light.
    I’ve scratched my head,checked connections,all seems ok,
    But it seems like it’s something infuriatingly simple.
    Any ideas?
     
  3. MadMrB

    MadMrB Elite Member

    Dec 24, 2018
    3,562
    800
    Northamptonshire, UK
    #83 MadMrB, Jan 27, 2020
    Last edited: Jan 27, 2020
    Fuse number 7 for horn, indicator and brake light, have you tried a new fuse?

    Could be a broken wire or short in that circuit :confused:

    Don't know if the attached diagram is of any help...
     

    Attached Files:

    • Useful Useful x 1
    • Agree Agree x 1
  4. Tom Gillam

    Tom Gillam Guest

    Doh!!,
    Cheers mate,I was fixated on the 5a and somehow missed that.
     
  5. Dartplayer

    Dartplayer Crème de la Crème

    Aug 8, 2018
    7,279
    1,000
    New Zealand
    I had the same circuit blow when the indicator wire got trapped behind the headlamp frame and wore through on my Speedmaster.
     
  6. Tom Gillam

    Tom Gillam Guest

    I don’t have any excuses,in the case of the problem solving chart,I’m a knob head.
     
    • Funny Funny x 1
    • Useful Useful x 1
  7. Tom Gillam

    Tom Gillam Guest

    Hello,
    I’ve got a question regarding front forks.
    Has anyone out there fitted the YSS emulators,and if so,can you tell me what improvements they had?
    So far I’ve fitted progressive springs with the compression adjusters which have improved the front end and YSS shocks on the back.
    So the real question is whether I’ll notice a real improvement if I fit the emulators?
    Thanks in advance.
     
  8. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,358
    800
    Nr Biggar
    I haven’t tried them but chasing the last few % of potential improvements can be disproportionately expensive to the actual benefit gained.......
    Part of the Bonnie’s charm is a certain old school resistance to being hurried too much. If you wanted a Street Triple......
     
    • Agree Agree x 4
  9. Tom Gillam

    Tom Gillam Guest

    Hello,
    Can anybody tell me what heated grips work with the inch bars 2002-2016 or there abouts?
    Many thanks in advance.
     
  10. Tom Gillam

    Tom Gillam Guest

    Ok cheers mate,I’ve fitted Daytona grips in the past,but the Oxfords seem to have good feedback and presumably they can go straight on the battery because of the intelligent switch?
     
    • Agree Agree x 1
  11. Tom Gillam

    Tom Gillam Guest

    The heated grips are now sorted and thanks to Half Ton for the heads up on the Oxford grips.
    I’ve now noticed that the indicators flash more quickly on one side,than the other.Am I right in thinking this needs a relay replacement,or is it something more simple than that?
    All the bulbs are working and flash,so it’s not the bulbs.
    Thanks in advance
     
  12. Glenn Gooderham

    Glenn Gooderham New Member

    May 12, 2020
    1
    1
    Lowestoft
    #92 Glenn Gooderham, Jul 25, 2020
    Last edited: Jul 25, 2020
    Hi I have a 2001 Bonneville which is not running to well at low revs Is this the air / Fuel Mixture adjusting screw port if so do I need a special tool to turn it? Looks like a circle with a flat side
    I am not sure it is a welch plug as it is brass and has a gap around the edge
    any help would be appricated the carbs are CVK36 KEIHEN 1245030 JB8
    underside of Carb in photo
    Thanks for any help
    [​IMG]
     
  13. Glenn Gooderham

    Glenn Gooderham New Member

    May 12, 2020
    1
    1
    Lowestoft
  14. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,358
    800
    Nr Biggar
    Mine came up ‘as new’ from an ultrasonic bath. Removes all oxidation and tarnish/varnish.
     
    • Like Like x 1
Loading...

Share This Page