Rear light and horn stopped working on Tiger Sport

Are you checking the correct fuse, change it anyway if you can get in clean the contacts as well definately
sounds to be the fuse more so if there on the same one.
other than that try and chase wires back and check continuity using a meter or just check for possible breaks etc

 

not sure Rob try chasing wires back and checking continuity when you can, someone with your actual bike will
come along and answer your questions,
PS its actually worth unseating fuses to check them rather than in situ may just have a corroded contact location
Sorry I cant be more help

 

def sounds like an earthing problem to me.

 

Sounds like multi-meter, wiring diagram and head scratching time dude. These niff naff electrical snags are a pain in the arse. No doubt that it'll be a simple fix that takes ages to find. Best of luck

 

I had horn and rear light prop 4 weeks ago,only my fuse blew.
Turned out when I lock steering, horn wire over stretched, and ripped, only this happened 4 inches into loom

 

does this help
http://www.triumphrat.net/speed-tri...-and-brake-light-stopped-working-fuse-ok.html

 

exactly dont just check fuses got to make sure if there ok they have a definate connection, either through pressure or free of corrosion or bad seating

 

Hello everyone here. I'm new here, and having the same problem as Rob, but on my Explorer 2014.
I can see the solution is found, but my question is, how difficult it is to change the ignition switch by your self considering that i'm 600km away from a Triumph dealer?
So, fuses are all right, everything other than horn and tail light works just fine.

 

Zdravo croTex, and welcome in

 

Zdravo zdravo thank you

 

I have spent many a happy time in Igrane, beautiful place

 

Yes it is, but there is even better if you go further south, Dubrovnik

 

Been there too but like the quieter places and had a couple of friends, Emil and Drago, who own a bar and restaurant there so was perfect for me